EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY 4.0

Improved quadriceps efficiency with a medial pivot in comparison to a cruciate‐retaining design in total knee arthroplasty

Leandra Bauer, Thomas R Niethammer, Christoph Thorwächter, Matthias Woiczinski, Peter E Müller, Florian Simon, Boris M Holzapfel, Johanna-Maria Simon iD

Knee Surgery, Sports Traumatology, Arthroscopy · 2025-07 · 33 (7) · 2527-2536

DOI: 10.1002/ksa.12624 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Knee Surgery, Sports Traumatology, Arthroscopy, online erschienen am 13.02.2025. Verfasst von Leandra Bauer und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedics and Trauma Surgery, Musculoskeletal University Center Munich (MUM), University Hospital Munich, LMU Munich, Munich, German…. Hauptthemen laut MEDLINE: Arthroplasty, Replacement, Knee, Knee Prosthesis, Prosthesis Design, Quadriceps Muscle. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Förderprogramm für Forschung und Lehre.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

The posterior cruciate‐retaining (CR) design offers rotational freedom but risks abnormal kinematics and instability. The medial pivot (MP) design mimics native joint motion with a high‐conformity medial and flat lateral interface. Within clinical studies, the MP design outclassed the CR design, but biomechanical studies are lacking. This study investigates the tibiofemoral and patellofemoral kinematics of both implant designs compared to native kinematics.

Methods

Eight fresh‐frozen cadaveric knee specimens underwent total knee arthroplasty using MP and CR designs. Testing was performed in a dynamic knee rig simulating active knee flexion (30–130°) under muscle load. Biomechanical assessments included tibial rotation, tibiofemoral translation, patellar tilt/shift, patellofemoral contact/pressure patterns and quadriceps force. Functional regressions were used to analyse the effects of the component designs on the native situation.

Results

The MP design exhibited increased tibial rotation (130° flexion: MP 9.4° vs. CR 6.6°) and lateral anterior tibial translation during flexion (130° flexion: MP 25.8 mm vs. CR 22.6 mm). Both designs showed no significant differences in patellar tilt or shift and similar patellofemoral pressure (CR 3.2 MPa, MP 3.4 MPa) and contact patterns (CR 213.8 mm 2 vs. MP 230.4 mm 2 ). The MP design required lower quadriceps force, particularly in deep flexion (NS 452.6 N, CR 407.8 N and MP 367.3 N).

Conclusion

The MP design provides a more native‐like knee kinematic profile than the CR design, with a more pronounced MP motion pattern and reduced quadriceps loading. Level of Evidence Not applicable.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Arthroplasty, Replacement, KneeKnee ProsthesisProsthesis DesignQuadriceps MuscleKnee JointHumansBiomechanical PhenomenaCadaverRange of Motion, ArticularAgedFemaleMaleMiddle AgedAged, 80 and over

Stichwörter der Autor:innen

cruciate retainingknee rigmedial pivotmedial stabilizedtotal knee arthroplasty

Autor:innen und Institutionen

  • Department of Orthopaedics and Trauma Surgery, Musculoskeletal University Center Munich (MUM), University Hospital Munich, LMU Munich, Munich, Germany.
  • Experimental Orthopaedics, University Hospital Jena, Campus Eisenberg, Waldkliniken Eisenberg, Friedrich-Schiller-University Jena, Jena, Germany.
  • Department of Otorhinolaryngology, LMU University Hospital, LMU Munich, Munich, Germany.

ORCID-Profile: Johanna-Maria Simon

Förderung

  • Förderprogramm für Forschung und Lehre

Zitieren

APA

Bauer, L., Niethammer, T. R., Thorwächter, C., Woiczinski, M., Müller, P. E., Simon, F., Holzapfel, B. M., & Simon, J. M. (2025). Improved quadriceps efficiency with a medial pivot in comparison to a cruciate‐retaining design in total knee arthroplasty. Knee Surgery, Sports Traumatology, Arthroscopy, 33(7), 2527-2536. https://doi.org/10.1002/ksa.12624

Vancouver

Bauer L, Niethammer TR, Thorwächter C, Woiczinski M, Müller PE, Simon F, et al. Improved quadriceps efficiency with a medial pivot in comparison to a cruciate‐retaining design in total knee arthroplasty. Knee Surgery, Sports Traumatology, Arthroscopy. 2025;33(7):2527-2536. doi:10.1002/ksa.12624

BibTeX
@article{Bauer2025,
  author = {Bauer, Leandra and Niethammer, Thomas R and Thorwächter, Christoph and Woiczinski, Matthias and Müller, Peter E and Simon, Florian and Holzapfel, Boris M and Simon, Johanna-Maria},
  title = {Improved quadriceps efficiency with a medial pivot in comparison to a cruciate‐retaining design in total knee arthroplasty},
  journal = {Knee Surgery, Sports Traumatology, Arthroscopy},
  year = {2025},
  volume = {33},
  number = {7},
  pages = {2527--2536},
  doi = {10.1002/ksa.12624}
}
Kostenlos starten →