EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Can a 3D Printed Chondrograft Implant Offer a Solution for Full Thickness Cartilage Lesions in an Equine Preclinical Model?

Charlotte K. Barton, Kathryn A. Seabaugh, Benjamin C. Gadomski, Kevin M. Labus, Benjamin B. Holmes, Nathan J. Castro, Michael L. Hawes, Brad B. Nelson, Laurie R. Goodrich

Journal of Orthopaedic Research · 2026-11 · 44 (11)

DOI: 10.1002/jor.70312 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Orthopaedic Research, online erschienen am 18.11.2026. Verfasst von Charlotte K. Barton und 8 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Articular cartilage defects have limited ability to heal resulting in fibrocartilage that is functionally and structurally inferior to hyaline cartilage. The aim of this study was to validate the Chondrograft Implant for full thickness cartilage lesion treatment, assessing its ability to fill the defect and support repair tissue engraftment. Bilateral 15 mm diameter cartilage defects were created on the lateral trochlear ridge of the femur in 12 skeletally mature horses. One defect was treated with the implant while the contralateral limb was an empty control defect. Horses were exercised starting at week 4 and study end points were at 36‐weeks for 4 horses and 52‐weeks for 8 horses. Lameness examinations were performed every 4 weeks and arthroscopic recheck surgeries were performed at 12‐weeks. Post‐mortem evaluation included macroscopic appearance, MRI, histology and biomechanical testing. Clinical, ICRS, MRI and gross morphology outcomes were compared between groups using parametric or non‐parametric tests as appropriate. Mechanical stiffness was compared between groups using two‐way ANOVA with Tukey's post‐hoc. There was no difference in lameness between control or treated limbs ( p > 0.5). The 12‐week arthroscopy showed treated defects had significantly improved fill (99% vs 42%, p < 0.0001) and ICRS scores (11.3 ± 1.1 vs 4.1 ± 3.1, p < 0.0001). Endpoint ICRS grade at 52‐ weeks was significantly better in the treated defect compared to the control defect scoring (3.75 ± 2.25 vs 9.125 ± 2.25, p = 0.0005). Biomechanical testing revealed significantly improved repair tissue stiffness in treated defects compared to controls ( p < 0.0001). Chondrograft implants resulted in excellent defect filling with biomechanical function similar to normal healthy articular cartilage.

Zitieren

APA

Barton, C. K., Seabaugh, K. A., Gadomski, B. C., Labus, K. M., Holmes, B. B., Castro, N. J., Hawes, M. L., Nelson, B. B., & Goodrich, L. R. (2026). Can a 3D Printed Chondrograft Implant Offer a Solution for Full Thickness Cartilage Lesions in an Equine Preclinical Model?. Journal of Orthopaedic Research, 44(11). https://doi.org/10.1002/jor.70312

Vancouver

Barton CK, Seabaugh KA, Gadomski BC, Labus KM, Holmes BB, Castro NJ, et al. Can a 3D Printed Chondrograft Implant Offer a Solution for Full Thickness Cartilage Lesions in an Equine Preclinical Model?. Journal of Orthopaedic Research. 2026;44(11). doi:10.1002/jor.70312

BibTeX
@article{Barton2026,
  author = {Barton, Charlotte K. and Seabaugh, Kathryn A. and Gadomski, Benjamin C. and Labus, Kevin M. and Holmes, Benjamin B. and Castro, Nathan J. and Hawes, Michael L. and Nelson, Brad B. and Goodrich, Laurie R.},
  title = {Can a 3D Printed Chondrograft Implant Offer a Solution for Full Thickness Cartilage Lesions in an Equine Preclinical Model?},
  journal = {Journal of Orthopaedic Research},
  year = {2026},
  volume = {44},
  number = {11},
  doi = {10.1002/jor.70312}
}
Kostenlos starten →