EUVIMEDEUVIMED entdecken
Crossref

3D Morphometric Analysis of Femoral Isthmus Dimensions and Their Influence on Modular Kinked Revision Stem Design in Total Hip Arthroplasty

Marco Zucchet iD, Cristiano Pizzamiglio iD, Beat Schmutz iD, Chong Bum Chang, Jung-Wee Park, Michele Pressacco

Journal of Orthopaedic Research · 2025

DOI: 10.1002/jor.70038 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Orthopaedic Research, 2025. Verfasst von Marco Zucchet und 5 weiteren Autor:innen. Beteiligte Einrichtung: Global Research and Development Department, Villanova di San Daniele del Friuli, Italy. Hauptthemen laut MEDLINE: Arthroplasty, Replacement, Hip, Femur, Hip Prosthesis, Prosthesis Design. Die Arbeit nennt 48 Literaturangaben. Gefördert von: LimaCorporate (now Enovis) provided funding for the acquisition of the CT images used in the study. B.S. received funding from LimaCorporate (now Enovis) for a….

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of stems for femoral revision surgeries requires an understanding of how distal fixation can be achieved, especially in those cases where the curvature of the diaphysis is not negligible, and a straight stem could result in three‐point fixation. To this extent, a series of parameters linked to the femoral canal isthmus were identified and their correlation, as well as the potential difference between White and Asian ethnicities, were investigated. The anatomical features of 215 three‐dimensional femur models were automatically computed. Statistical inference was performed leveraging the frequentist and Bayesian frameworks. A moderate positive correlation was found between the three‐dimensional proximal‐isthmus axis angle α and the distance between the isthmus cross‐section and proximal‐isthmus axis tilting point D TI ( p < 0.001, B 10 = 1.1 · 10 5 , ρ = 0.35). White subjects had both significantly longer distance between the head center and isthmus cross‐section D HI ( p < 0.001, B 10 = 626.57, ∆ µ = 10.18 mm) and longer distance between the head center and tilting point D HT ( p < 0.001, B 10 = 1.2 · 10 5 , ∆ µ = 12.33 mm) with respect to Asian ones. Among all parameters, the correlation between α and D TI is the most relevant and should be considered in designing a kinked revision stem to determine the best trade‐off between fixation area and mechanical stability. The difference between White and Asian patients found for D HI and the correlation between α and D HI might have no practical effect in case of modular stem design. The remaining parameters had neither statistically significant correlation/difference nor practical impact on the design. These findings allow to reduce the design variables, thus leading to a more effective design process.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Arthroplasty, Replacement, HipFemurHip ProsthesisProsthesis DesignHumansMaleFemaleMiddle AgedAgedImaging, Three-DimensionalReoperationAdultAged, 80 and over

Stichwörter der Autor:innen

Bayesian inferencefemoral axisfemoral isthmusfemoral revision stemstatistical shape model

Autor:innen und Institutionen

  • Global Research and Development Department, Villanova di San Daniele del Friuli, Italy.
  • Jamieson Trauma Institute, Brisbane, Australia.
  • School of Mechanical, Medical and Process Engineering, Faculty of Engineering, Queensland University of Technology, Kelvin Grove, Australia.
  • Centre for Biomedical Technologies, Queensland University of Technology, Kelvin Grove, Australia.
  • 5ARC Training Centre for Multiscale 3D Imaging, Modelling, and Manufacturing, Queensland University of Technology, Kelvin Grove, Australia.
  • Department of Orthopaedic Surgery, Seoul National University Bundang Hospital, Seongnam-si, South Korea.

ORCID-Profile: Marco Zucchet, Cristiano Pizzamiglio, Beat Schmutz

Förderung

  • LimaCorporate (now Enovis) provided funding for the acquisition of the CT images used in the study. B.S. received funding from LimaCorporate (now Enovis) for a…

Zitieren

APA

Zucchet, M., Pizzamiglio, C., Schmutz, B., Bum Chang, C., Park, J. W., & Pressacco, M. (2025). 3D Morphometric Analysis of Femoral Isthmus Dimensions and Their Influence on Modular Kinked Revision Stem Design in Total Hip Arthroplasty. Journal of Orthopaedic Research. https://doi.org/10.1002/jor.70038

Vancouver

Zucchet M, Pizzamiglio C, Schmutz B, Bum Chang C, Park JW, Pressacco M. 3D Morphometric Analysis of Femoral Isthmus Dimensions and Their Influence on Modular Kinked Revision Stem Design in Total Hip Arthroplasty. Journal of Orthopaedic Research. 2025. doi:10.1002/jor.70038

BibTeX
@article{Zucchet2025,
  author = {Zucchet, Marco and Pizzamiglio, Cristiano and Schmutz, Beat and Bum Chang, Chong and Park, Jung-Wee and Pressacco, Michele},
  title = {3D Morphometric Analysis of Femoral Isthmus Dimensions and Their Influence on Modular Kinked Revision Stem Design in Total Hip Arthroplasty},
  journal = {Journal of Orthopaedic Research},
  year = {2025},
  doi = {10.1002/jor.70038}
}
Kostenlos starten →