Corroboration of coupled musculoskeletal model and finite element predictions with in vivo RSA migration of an uncemented acetabular component
Journal of Orthopaedic Research · 2024
DOI: 10.1002/jor.25671 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Orthopaedic Research, 2024. Verfasst von Khosro Fallahnezhad und 6 weiteren Autor:innen. Beteiligte Einrichtung: Medical Device Research Institute, College of Science and Engineering, Flinders University, Adelaide, South Australia, Australia. Hauptthemen laut MEDLINE: Hip Prosthesis, Arthroplasty, Replacement, Hip. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 50 Literaturangaben.
Abstract (Originalsprache)
While finite element (FE) models have been used extensively in orthopedic studies, validation of their outcome metrics has been limited to comparison against ex vivo testing. The aim of this study was to validate FE model predictions of the initial cup mechanical environment against patient‐matched in vivo measurements of acetabular cup migration using radiostereometric analysis (RSA). Tailored musculoskeletal and FE models were developed using a combination of three‐dimensional (3D) motion capture data and clinical computerized tomography (CT) scans for a cohort of eight individuals who underwent primary total hip replacement and were prospectively enrolled in an RSA study. FE models were developed to calculate the mean modulus of cancellous bone, composite peak micromotion (CPM), composite peak strain (CPS) and percentage area of bone ingrowth. The RSA cup migration at 3 months was used to corroborate the FE output metrics. Qualitatively, all FE‐predicted metrics followed a similar rank order as the in vivo RSA 3D migration data. The two cases with the lowest predicted CPM (0.0119) and lowest bone modulus (0.78 mm). This study enabled the first corroboration between tailored musculoskeletal and FE model predictions with in vivo RSA cup migration. Investigation of additional patient‐matched CT, gait, and RSA examinations may allow further development and validation of FE models.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Medical Device Research Institute, College of Science and Engineering, Flinders University, Adelaide, South Australia, Australia.
- Centre for Orthopaedics and Trauma Research (COTR), The University of Adelaide, Adelaide, South Australia, Australia.
- Department of Orthopaedics and Trauma, Royal Adelaide Hospital, Adelaide, South Australia, Australia.
- School of Mechanical, Medical and Process Engineering, Queensland University of Technology, Brisbane, Queensland, Australia.
ORCID-Profile: Khosro Fallahnezhad, Stuart A Callary, Dermot O'Rourke, Jasvir S Bahl, Dominic Thewlis, Mark Taylor
Zitieren
APA
Fallahnezhad, K., Callary, S. A., O'Rourke, D., Bahl, J. S., Thewlis, D., Solomon, L. B., & Taylor, M. (2024). Corroboration of coupled musculoskeletal model and finite element predictions with in vivo RSA migration of an uncemented acetabular component. Journal of Orthopaedic Research. https://doi.org/10.1002/jor.25671
Vancouver
Fallahnezhad K, Callary SA, O'Rourke D, Bahl JS, Thewlis D, Solomon LB, et al. Corroboration of coupled musculoskeletal model and finite element predictions with in vivo RSA migration of an uncemented acetabular component. Journal of Orthopaedic Research. 2024. doi:10.1002/jor.25671
BibTeX
@article{Fallahnezhad2024,
author = {Fallahnezhad, Khosro and Callary, Stuart A and O'Rourke, Dermot and Bahl, Jasvir S and Thewlis, Dominic and Solomon, Lucian B and Taylor, Mark},
title = {Corroboration of coupled musculoskeletal model and finite element predictions with in vivo RSA migration of an uncemented acetabular component},
journal = {Journal of Orthopaedic Research},
year = {2024},
doi = {10.1002/jor.25671}
}
EUVIMED