Numerical Analysis and Design of a High‐Frequency Surface Acoustic Wave Transducer: Influence of Piezoelectric Substrates and IDTs Configurations
International Journal of Numerical Modelling: Electronic Networks, Devices and Fields · 2024-09 · 37 (5)
DOI: 10.1002/jnm.3306 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, online erschienen am 14.10.2024. Verfasst von Alonso Fernández‐García und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben.
Abstract (Originalsprache)
The development of SAW transducers requires a series of steps ranging from material selection and geometry design to the selection of fabrication techniques for their characterization and validation process. Here, we use the finite element method (FEM) to present a methodology and a detailed analysis of the design of SAW transducers in a delay line configuration. First, we simulate single‐finger and double‐finger configurations with different geometries and designs of IDTs on two piezoelectric substrates, LiNbO in 64 YX and LiNbO 128 YX orientation, to compare the simulation results with the analytical delta model and thereby validate the simulation process, presenting Root Mean Square Error (RMSE) values ranging from 10.79 dB to 16.42 dB. With the above, we performed a comparative analysis to determine the influence of piezoelectric material and IDT configuration by studying a specific transducer design made to operate at a resonance frequency of 97.02 MHz. We compared identical designs on 128 YX and 64 YX orientations of LiNbO with single and double‐finger configurations and added the comparison with the SPUDT configuration. We observed the best results for the single‐finger IDT configuration in 128 YX LiNbO orientation compared to the other variants through its insertion loss level of −7.29 dB, its average sidelobe level of −18.63 dB, and its average transition band slope for the main lobe of 15.09 dB/MHz. The results guide new researchers or students in expanding the use of numerical tools in designing SAW transducers and SAW devices.
Zitieren
APA
Fernández‐García, A., Solís‐Tinoco, V. I., Arce, M. Á. A., Villa‐Vargas, L. A., Salinas, M. A. R., & García, J. C. S. (2024). Numerical Analysis and Design of a High‐Frequency Surface Acoustic Wave Transducer: Influence of Piezoelectric Substrates and IDTs Configurations. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 37(5). https://doi.org/10.1002/jnm.3306
Vancouver
Fernández‐García A, Solís‐Tinoco VI, Arce MÁA, Villa‐Vargas LA, Salinas MAR, García JCS. Numerical Analysis and Design of a High‐Frequency Surface Acoustic Wave Transducer: Influence of Piezoelectric Substrates and IDTs Configurations. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields. 2024;37(5). doi:10.1002/jnm.3306
BibTeX
@article{FernndezGarca2024,
author = {Fernández‐García, Alonso and Solís‐Tinoco, Verónica Iraís and Arce, Miguel Ángel Alemán and Villa‐Vargas, Luis Alfonso and Salinas, Marco Antonio Ramírez and García, Juan Carlos Sánchez},
title = {Numerical Analysis and Design of a High‐Frequency Surface Acoustic Wave Transducer: Influence of Piezoelectric Substrates and IDTs Configurations},
journal = {International Journal of Numerical Modelling: Electronic Networks, Devices and Fields},
year = {2024},
volume = {37},
number = {5},
doi = {10.1002/jnm.3306}
}
EUVIMED