EUVIMEDObjevte EUVIMED
Systematische ÜbersichtOpen access · CC BY 4.0

Feasibility of Designing, Manufacturing and Delivering 3D Printed Ankle‐Foot Orthoses: An Updated Systematic Review

Joyce Z Wang iD, Elizabeth A Wojciechowski, Thomas Paine, Joshua Burns, Tegan L Cheng

Journal of Foot and Ankle Research · 2025-12 · 18 (4)

DOI: 10.1002/jfa2.70097 ↗

At a glance

Systematische Übersicht in Journal of Foot and Ankle Research, published online on 2025-12-09. Written by Joyce Z Wang and 4 co-authors. Institution: School of Health Sciences, Faculty of Medicine and Health & Children's Hospital at Westmead, University of Sydney, Sydney, Australia. Major MEDLINE topics: Printing, Three-Dimensional, Foot Orthoses, Equipment Design. Cited 5 times so far (Crossref); 39 references. The full text is freely available (open access, CC BY 4.0). Funded by: NINDS NIH HHS, National Health and Medical Research Council, NIH HHS.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Background

Ankle‐foot orthoses (AFOs) are commonly prescribed to manage lower limb impairments, especially foot drop in neurological disorders. With the evolution of 3D technology, digital acquisition using 3D scanning and modelling using computer aided design software is becoming more commonplace to produce AFOs. Our previous systematic review in 2019 identified an emerging field of 3D printed AFOs and we highlighted biomechanical effects, mechanical properties and self‐reported outcomes such as comfort. To cover the rapidly growing literature on the effects of 3D printed AFOs in clinical populations, the aim of this systematic review was to update an earlier review from 2019 to determine the feasibility and effect of 3D printed AFOs on biomechanical and satisfaction outcomes.

Method

Seven electronic databases were searched from 1985 to July 2025. Original research papers of any design from healthy or clinical populations of any age were eligible for inclusion. Studies must have investigated the effect of 3D printed AFOs in healthy or pathological populations. The quality of the evidence was assessed using QualSyst.

Results

Twenty‐eight papers were included in the updated systematic review. The use of 3D printing methods and materials varied markedly, where fused deposition modelling was more prevalent in recent literature than selective laser sintering, and Nylon 12 was most tested. The sample sizes were all smaller than 12. Walking speed and step length of people wearing 3D printed AFOs were mostly improved compared to those with other AFOs and shod or barefoot only. 3D printed AFOs generally had similar or higher satisfaction scores than traditional AFOs. Although levels of evidence were all lower than four, 10 papers had excellent study quality.

Conclusion

The use of additive manufacturing in AFO fabrication has rapidly increased in the past few years. The novel designed 3D printed AFOs might have potential benefits over traditional designs in terms of biomechanical outcomes. 3D printed AFOs have been further proven to be comparable to traditional ones. Further research is encouraged to conduct with more specific condition characteristics such as cerebral palsy within a specific GMFCS level, longitudinal clinical trials and testing in a home or natural environment. Establishing a standard for AFO evaluation and reporting is also recommended.

Subjects

MeSH terms (MEDLINE)

Printing, Three-DimensionalFoot OrthosesEquipment DesignHumansFeasibility StudiesBiomechanical PhenomenaAnklePatient SatisfactionMale

Author keywords

3D printingAFOadditive manufacturingankle foot orthosesgait

Authors and institutions

  • School of Health Sciences, Faculty of Medicine and Health & Children's Hospital at Westmead, University of Sydney, Sydney, Australia.
  • EPIC Lab, The Children's Hospital at Westmead, Sydney, Australia.
  • Paediatric Gait Analysis Service of NSW, The Children's Hospital at Westmead, Westmead, Australia.
  • Department of Orthotics, The Children's Hospital at Westmead, Sydney, Australia.
  • Department of Epidemiology and Cancer Control, St. Jude Children's Research Hospital, Memphis, Tennessee, USA.

ORCID profiles: Joyce Z Wang

Funding

  • NINDS NIH HHS
  • National Health and Medical Research Council
  • NIH HHS
  • Muscular Dystrophy Association
  • MRFF

Cite

APA

Wang, J. Z., Wojciechowski, E. A., Paine, T., Burns, J., & Cheng, T. L. (2025). Feasibility of Designing, Manufacturing and Delivering 3D Printed Ankle‐Foot Orthoses: An Updated Systematic Review. Journal of Foot and Ankle Research, 18(4). https://doi.org/10.1002/jfa2.70097

Vancouver

Wang JZ, Wojciechowski EA, Paine T, Burns J, Cheng TL. Feasibility of Designing, Manufacturing and Delivering 3D Printed Ankle‐Foot Orthoses: An Updated Systematic Review. Journal of Foot and Ankle Research. 2025;18(4). doi:10.1002/jfa2.70097

BibTeX
@article{Wang2025,
  author = {Wang, Joyce Z and Wojciechowski, Elizabeth A and Paine, Thomas and Burns, Joshua and Cheng, Tegan L},
  title = {Feasibility of Designing, Manufacturing and Delivering 3D Printed Ankle‐Foot Orthoses: An Updated Systematic Review},
  journal = {Journal of Foot and Ankle Research},
  year = {2025},
  volume = {18},
  number = {4},
  doi = {10.1002/jfa2.70097}
}
Start for free →