EUVIMEDEUVIMED entdecken
Crossref

A comprehensive study on the effect of air gap distances on morphology and gas separation performance of cellulose triacetate/polysulfone dual‐layer hollow fiber membrane

Muhammad Hamad Zeeshan, Yin Fong Yeong, Thiam Leng Chew

Journal of Chemical Technology & Biotechnology · 2025-04 · 100 (4) · 742-753

DOI: 10.1002/jctb.7811 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Chemical Technology & Biotechnology, online erschienen am 09.01.2025. Verfasst von Muhammad Hamad Zeeshan und 2 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

BACKGROUND Dual‐layer hollow‐fiber (DLHF) membranes possess various advantages over single‐layer hollow‐fiber (SLHF) membranes, such as use of brittle but high‐performance materials, greater flexibility in the spinning process, improved pressure resistance, and reduced substrate resistance. However DLHF membranes face challenges in the fabrication process. Key spinning parameters of DLHF membranes such as dope flow rate, take‐up speed, coagulant composition, and spinning temperature, are well studied in the literature, but the impact of higher air gap distance on membrane morphology and separation is less explored due to limited fabrication environments. Additionally, using different polymers for the outer and inner layers can reduce costs but often causes delamination, hindering DLHF membrane advancement. In this study, a new combination of cellulose triacetate (CTA) and polysulfone (PSf) polymers was used to fabricate a delamination‐free DLHF membrane by varying the air gap distance in the range of 3–15 cm. Scanning electron microscopic analysis was performed to study its effect on membrane morphology. RESULTS The obtained results showed that the DLHF membrane spun at an air gap distance of 9 cm exhibited a CO 2 permeability of 17.76 GPU (gas permeation units), and CO 2 /CH 4 and CO 2 /N 2 selectivity of 12.00 and 17.44, respectively, which were 377.32% and 579.68% higher than that of fibers spun at 3 cm air gap distance. CONCLUSION In this study, it can be inferred that 9 cm is the optimum air gap distance of the CTA/PSf DLHF membrane in terms of performance, thus making them a potential polymer combination for future DLHF membrane fabrication and gas separation. © 2025 Society of Chemical Industry (SCI).

Zitieren

APA

Zeeshan, M. H., Yeong, Y. F., & Chew, T. L. (2025). A comprehensive study on the effect of air gap distances on morphology and gas separation performance of cellulose triacetate/polysulfone dual‐layer hollow fiber membrane. Journal of Chemical Technology & Biotechnology, 100(4), 742-753. https://doi.org/10.1002/jctb.7811

Vancouver

Zeeshan MH, Yeong YF, Chew TL. A comprehensive study on the effect of air gap distances on morphology and gas separation performance of cellulose triacetate/polysulfone dual‐layer hollow fiber membrane. Journal of Chemical Technology & Biotechnology. 2025;100(4):742-753. doi:10.1002/jctb.7811

BibTeX
@article{Zeeshan2025,
  author = {Zeeshan, Muhammad Hamad and Yeong, Yin Fong and Chew, Thiam Leng},
  title = {A comprehensive study on the effect of air gap distances on morphology and gas separation performance of cellulose triacetate/polysulfone dual‐layer hollow fiber membrane},
  journal = {Journal of Chemical Technology & Biotechnology},
  year = {2025},
  volume = {100},
  number = {4},
  pages = {742--753},
  doi = {10.1002/jctb.7811}
}
Kostenlos starten →