Enhancing Water Treatment Performance of Porous Polysulfone Hollow Fiber Membranes through Atomic Layer Deposition
Molecules · 18.08.2023 · 28 (16) · 6133
DOI: 10.3390/molecules28166133 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, online erschienen am 18.08.2023. Verfasst von Jeanne Casetta und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institut Européen des Membranes-IEM, UMR-5635, University of Montpellier, ENSCM, CNRS, Place Eugene Bataillon, 34095 Montpellier, France. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon 2020 Research and Innovation Program.
Abstract (Originalsprache)
Polysulfone (PSF) is one of the most used polymers for water treatment membranes, but its intrinsic hydrophobicity can be detrimental to the membranes’ performances. By modifying a membrane’s surface, it is possible to adapt its physicochemical properties and thus tune the membrane’s hydrophilicity or porosity, which can achieve improved permeability and antifouling efficiency. Atomic layer deposition (ALD) stands as a distinctive technology offering exceedingly even and uniform layers of coatings, like oxides that cover the surfaces of objects with three-dimensional (3D) shapes, porous structures, and particles. In the context of this study, the focus was on titanium dioxide (TiO2), zinc oxide (ZnO), and alumina (Al2O3), which were deposited on polysulfone hollow fiber (HF) membranes via ALD using TiCl4, diethyl zinc (DEZ), and trimethylamine (TMA), respectively, and H2O as precursors. The morphology and mechanical properties of membranes were changed without damaging their performances. The deposition was confirmed mainly by energy-dispersive X-ray spectroscopy (EDX). All depositions offered great performances with a maintained permeability and BSA retention and a 20 to 40° lower water contact angle (WCA) than the raw PSF HF membrane. The deposition of TiO2 offered the best results, showing an enhancement of 50% for the water permeability and 20% for the fouling resistance of the PSF HF membranes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institut Européen des Membranes-IEM, UMR-5635, University of Montpellier, ENSCM, CNRS, Place Eugene Bataillon, 34095 Montpellier, France.
- Applied Mathematics and Bioinformatics (CAMB), Gulf University for Science and Technology-GUST, Kuwait City 32093, Kuwait.
ORCID-Profile: Céline Pochat-Bohatier, David Cornu, Mikhael Bechelany, Philippe Miele
Förderung
- European Union’s Horizon 2020 Research and Innovation Program
Zitieren
APA
Casetta, J., Pochat-Bohatier, C., Cornu, D., Bechelany, M., & Miele, P. (2023). Enhancing Water Treatment Performance of Porous Polysulfone Hollow Fiber Membranes through Atomic Layer Deposition. Molecules, 28(16), 6133. https://doi.org/10.3390/molecules28166133
Vancouver
Casetta J, Pochat-Bohatier C, Cornu D, Bechelany M, Miele P. Enhancing Water Treatment Performance of Porous Polysulfone Hollow Fiber Membranes through Atomic Layer Deposition. Molecules. 2023;28(16):6133. doi:10.3390/molecules28166133
BibTeX
@article{Casetta2023,
author = {Casetta, Jeanne and Pochat-Bohatier, Céline and Cornu, David and Bechelany, Mikhael and Miele, Philippe},
title = {Enhancing Water Treatment Performance of Porous Polysulfone Hollow Fiber Membranes through Atomic Layer Deposition},
journal = {Molecules},
year = {2023},
volume = {28},
number = {16},
pages = {6133},
doi = {10.3390/molecules28166133}
}
EUVIMED