Diffusion of Hydrogen Peroxide Through Medical Grade Poly(Ether)urethane: Analyzing Mechanisms of Sorption and Transport to Support Sterilization With Vapor Phase Hydrogen Peroxide
Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2025
DOI: 10.1002/jbm.b.35567 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2025. Verfasst von Ioan P I Gitsov und 11 weiteren Autor:innen. Beteiligte Einrichtung: Global Technology and Innovation, Medtronic Inc, Minneapolis, Minnesota, USA. Hauptthemen laut MEDLINE: Hydrogen Peroxide, Sterilization, Polyurethanes. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Medtronic and the Center for Devices and Radiological Health.
Abstract (Originalsprache)
The United States Food and Drug Administration (FDA) recently announced an update to their 510(k) medical device sterility guidance to include vapor phase hydrogen peroxide (VH2O2) as an established ‘Category A’ sterilization process. This places VH2O2 in the same category as ethylene oxide (EO or EtO), which has demonstrated user and patient safety as well as microbiocidal effectiveness through scientific literature and FDA‐recognized consensus standards. For some implantable medical devices, the sterilant chemistry must diffuse through the polymers of construction to access sealed parts of the finished assembly to achieve an appropriate sterility assurance level. Diffusion of EO through materials has been well established over decades of successful use. However, the ability of VH2O2 to diffuse through materials of construction has not been demonstrated. In this work, we measured the diffusivity and permeability of VH2O2 for a series of increasing durometer poly(ether)urethanes (PEUs) commonly used in the construction of single‐use medical devices. The diffusion coefficients were 1 × 10 −8 cm 2 /s for PEU75D, 2 × 10 −8 cm 2 /s for PEU55D, and 5 × 10 −8 cm 2 /s for PEU80A. The permeabilities were calculated to be 4.7 × 10 −6 cm 2 /s and 1.3 × 10 −5 cm 2 /s for PEU55D and PEU80A, respectively. For a typical cardiac or neuromodulation lead, the PEU80A wall thickness is on the order of 0.013 cm, resulting in penetration of hydrogen peroxide into the sealed construction in less than 10 min, a timeframe that is a fraction of the total sterilization cycle time.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Global Technology and Innovation, Medtronic Inc, Minneapolis, Minnesota, USA.
- Center for Devices and Radiological Health, FDA, Silver Spring, Maryland, USA.
- Neurosciences, Medtronic Inc, Minneapolis, Minnesota, USA.
ORCID-Profile: David M Saylor, Kimberly A Chaffin
Förderung
- Medtronic and the Center for Devices and Radiological Health
Zitieren
APA
Gitsov, I. P. I., Liu, Y., Saylor, D. M., Hendrickx, A. L., Gronda, A. M., Sinha, M. N., Long, E., Liu, S., Hu, R., Weeks, J. W., Eppihimer, M., & Chaffin, K. A. (2025). Diffusion of Hydrogen Peroxide Through Medical Grade Poly(Ether)urethane: Analyzing Mechanisms of Sorption and Transport to Support Sterilization With Vapor Phase Hydrogen Peroxide. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.35567
Vancouver
Gitsov IPI, Liu Y, Saylor DM, Hendrickx AL, Gronda AM, Sinha MN, et al. Diffusion of Hydrogen Peroxide Through Medical Grade Poly(Ether)urethane: Analyzing Mechanisms of Sorption and Transport to Support Sterilization With Vapor Phase Hydrogen Peroxide. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2025. doi:10.1002/jbm.b.35567
BibTeX
@article{Gitsov2025,
author = {Gitsov, Ioan P I and Liu, Yunzhi and Saylor, David M and Hendrickx, Angela L and Gronda, Ann M and Sinha, Maruti N and Long, Eric and Liu, Shan and Hu, Ruibo and Weeks, Jon W and Eppihimer, Michael and Chaffin, Kimberly A},
title = {Diffusion of Hydrogen Peroxide Through Medical Grade Poly(Ether)urethane: Analyzing Mechanisms of Sorption and Transport to Support Sterilization With Vapor Phase Hydrogen Peroxide},
journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
year = {2025},
doi = {10.1002/jbm.b.35567}
}
EUVIMED