Atomic Interaction S. aureus /Machined and Additive Manufacturing Ti‐ 6Al ‐ 4V and Ti‐ 35Nb ‐ 7Zr ‐ 5Ta Disks for Dental Implants
Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2024
DOI: 10.1002/jbm.b.35508 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2024. Verfasst von Juliana Dias Corpa Tardelli und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dental Materials and Prosthesis, School of Dentistry of Ribeirão Preto, University of São Paulo (USP), Ribeirão Preto, São Paulo, Brazi…. Hauptthemen laut MEDLINE: Staphylococcus aureus, Titanium, Dental Implants, Bacterial Adhesion. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 68 Literaturangaben. Gefördert von: Fundação de Amparo à Pesquisa do Estado de São Paulo.
Abstract (Originalsprache)
The adhesion strength of a bacterial strain on a substrate influences colonization and biofilm development, so the biomolecular analysis of this interaction is a step that allows insights into the development of antifouling surfaces. As peri‐implantitis is the main cause of failure of implant‐supported oral rehabilitations and the dental literature presents gaps in the atomic bacteria/surface interaction, this study aimed to correlate the qualitative variation of roughness, wettability, chemical composition, and electrical potential of Ti‐6Al‐4V and Ti‐35Nb‐7Zr‐5Ta (TNZT) disks obtained by machining (M) and additive manufacturing (AM) on the colonization and adhesion strength of S. aureus quantified by atomic force microscopy (AFM). The samples were evaluated for roughness, electrical potential, and S. aureus colonization and adhesion strength by specific methods in the AFM with subsequent analysis in the NanoScope software analysis, wettability by sessile drop method, and chemical composition by energy dispersive x‐ray spectroscopy (EDX). Qualitative data were correlated with bacterial adhesion strength. The greater adhesion strength of S. aureus was observed in descending order for TNZT AM, TNZT M, Ti‐6Al‐4V AM, and Ti‐6Al‐4V M. This experimental in vitro study allowed us to conclude that for the evaluated groups, the strength adhesion of S. aureus showed a linear relationship with roughness, and nonlinear for wettability, electrical potential, and S. aureus colonization on the surfaces evaluated. As for the two variation factors, type of alloy and manufacturing method, those that promoted the lowest bacterial adhesion strength were Ti‐6Al‐4V and M, possibly attributed to the synergistic modification of the evaluated surface properties. Thus, this study suggests S. aureus preferences for rough, hydrophilic surfaces with a greater electrical potential difference.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Dental Materials and Prosthesis, School of Dentistry of Ribeirão Preto, University of São Paulo (USP), Ribeirão Preto, São Paulo, Brazil.
- Department of Materials Engineering, Federal University of São Carlos (UFSCAR), São Carlos, São Paulo, Brazil.
- Department of Research, Development and Innovation, Instituto de Soldadura e Qualidade, Oeiras, Portugal.
- Optics Group From São Carlos Institute of Physics (IFSC), University of São Paulo (USP), São Carlos, São Paulo, Brazil.
ORCID-Profile: Rodolfo Lisboa Batalha, Andréa Cândido Dos Reis
Förderung
- Fundação de Amparo à Pesquisa do Estado de São Paulo
Zitieren
APA
Tardelli, J. D. C., Otani, L. B., Batalha, R. L., Alves, F., Pereira-da-Siva, M. A., Bagnato, V. S., Gargarella, P., Bolfarini, C., & Dos Reis, A. C. (2024). Atomic Interaction S. aureus /Machined and Additive Manufacturing Ti‐ 6Al ‐ 4V and Ti‐ 35Nb ‐ 7Zr ‐ 5Ta Disks for Dental Implants. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.35508
Vancouver
Tardelli JDC, Otani LB, Batalha RL, Alves F, Pereira-da-Siva MA, Bagnato VS, et al. Atomic Interaction S. aureus /Machined and Additive Manufacturing Ti‐ 6Al ‐ 4V and Ti‐ 35Nb ‐ 7Zr ‐ 5Ta Disks for Dental Implants. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2024. doi:10.1002/jbm.b.35508
BibTeX
@article{Tardelli2024,
author = {Tardelli, Juliana Dias Corpa and Otani, Lucas Barcelos and Batalha, Rodolfo Lisboa and Alves, Fernanda and Pereira-da-Siva, Marcelo A and Bagnato, Vanderlei Salvador and Gargarella, Piter and Bolfarini, Claudemiro and Dos Reis, Andréa Cândido},
title = {Atomic Interaction S. aureus /Machined and Additive Manufacturing Ti‐ 6Al ‐ 4V and Ti‐ 35Nb ‐ 7Zr ‐ 5Ta Disks for Dental Implants},
journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
year = {2024},
doi = {10.1002/jbm.b.35508}
}
EUVIMED