EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Additively Manufactured 3D Clamp‐Culture System for the Investigation of Material‐Cell Interactions in Multi‐Material Hybrid Scaffolds for Musculoskeletal Tissue Defects

Simon Enbergs iD, Lennard K Shopperly iD, Andreas Engels, Dominik Laue, Wolfgang Ertel, Michael Sittinger, Carsten Rendenbach, Tilo Dehne iD, Michal Jagielski, Jacob Spinnen iD

Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2024

DOI: 10.1002/jbm.b.35494 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2024. Verfasst von Simon Enbergs und 9 weiteren Autor:innen. Beteiligte Einrichtung: Charité - Universitätsmedizin Berlin, Corporate Member of Freie Universität Berlin and Humboldt-Universität Zu Berlin, Tissue Engineering Laboratory,…. Hauptthemen laut MEDLINE: Tissue Scaffolds, Printing, Three-Dimensional, Hydrogels. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The emergence of hybrid scaffolds, blending biomaterials with diverse properties, offers promise in musculoskeletal tissue engineering. However, a need for in vitro platforms investigating biological behavior and the interplay of different load‐bearing and colonizable synthetic bone substitute materials remains. Herein, we present a novel, in‐house producible, and scalable clamp culture system designed for facile in vitro analysis of interactions between biomaterials, hydrogels, and cells. The system, constructed here from an exemplary 3D‐printable polymer and photopolymerizable hydrogel using a widely available benchtop 3D printer, ensures mechanical stability and protection for the embedded hydrogel via its double‐clamp structure, facilitating various analytical methods while preserving culture integrity. Hybrid clamp cultures were additively manufactured from polylactic acid, filled with a bone precursor cell‐laden methacrylate gelatin hydrogel, cultured for 14 days, and analyzed for cell viability, mineralization, and osseous differentiation. Results indicate no adverse effects on osteogenic differentiation or mineralization compared to conventional droplet cultures, with enhanced cell viability and simplified handling and downstream analysis. This system demonstrates the potential for robust experimentation in tissue engineering and is adaptable to various plate formats, and thus highly suitable for the investigation of biomaterial‐cell interactions and the development of implants for musculoskeletal tissue defects.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue ScaffoldsPrinting, Three-DimensionalHydrogelsHumansPolyestersTissue EngineeringOsteogenesisCell DifferentiationCell SurvivalGelatinCell Culture Techniques, Three DimensionalAnimals

Stichwörter der Autor:innen

3D culture3D printingbone tissue engineeringhybrid scaffoldtissue culture

Substanzen

HydrogelsPolyesterspoly(lactide)Gelatin

Autor:innen und Institutionen

  • Charité - Universitätsmedizin Berlin, Corporate Member of Freie Universität Berlin and Humboldt-Universität Zu Berlin, Tissue Engineering Laboratory, BIH Center of Regenerative Therapies, Department of Rheumatology and…
  • Charité - Universitätsmedizin Berlin, Berlin, Germany.
  • Charité - Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt-Universität zu Berlin, Department of Oral and Maxillofacial Surgery, Berlin, Germany.
  • Berlin Institute of Health at Charité - Universitätsmedizin Berlin, BIH Academy, Junior Clinician Scientist Program, Berlin, Germany.

ORCID-Profile: Simon Enbergs, Lennard K Shopperly, Tilo Dehne, Jacob Spinnen

Zitieren

APA

Enbergs, S., Shopperly, L. K., Engels, A., Laue, D., Ertel, W., Sittinger, M., Rendenbach, C., Dehne, T., Jagielski, M., & Spinnen, J. (2024). Additively Manufactured 3D Clamp‐Culture System for the Investigation of Material‐Cell Interactions in Multi‐Material Hybrid Scaffolds for Musculoskeletal Tissue Defects. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.35494

Vancouver

Enbergs S, Shopperly LK, Engels A, Laue D, Ertel W, Sittinger M, et al. Additively Manufactured 3D Clamp‐Culture System for the Investigation of Material‐Cell Interactions in Multi‐Material Hybrid Scaffolds for Musculoskeletal Tissue Defects. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2024. doi:10.1002/jbm.b.35494

BibTeX
@article{Enbergs2024,
  author = {Enbergs, Simon and Shopperly, Lennard K and Engels, Andreas and Laue, Dominik and Ertel, Wolfgang and Sittinger, Michael and Rendenbach, Carsten and Dehne, Tilo and Jagielski, Michal and Spinnen, Jacob},
  title = {Additively Manufactured 3D Clamp‐Culture System for the Investigation of Material‐Cell Interactions in Multi‐Material Hybrid Scaffolds for Musculoskeletal Tissue Defects},
  journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
  year = {2024},
  doi = {10.1002/jbm.b.35494}
}
Kostenlos starten →