EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Osteoblast and bacterial cell response on RGD peptide‐functionalized chitosan coatings electrophoretically deposited from different suspensions on Ti13Nb13Zr alloy

Łukasz Pawłowski iD, Szymon Mania iD, Adrianna Banach-Kopeć iD, Michał Bartmański iD, Anna Ronowska iD, Kacper Jurak iD, Aleksandra Mielewczyk-Gryń iD, Natalia Karska iD, Sylwia Rodziewicz-Motowidło iD, Andrzej Zieliński iD

Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2023

DOI: 10.1002/jbm.b.35286 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2023. Verfasst von Łukasz Pawłowski und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Manufacturing and Materials Technology, Faculty of Mechanical Engineering and Ship Technology, Gdańsk University of Technology, Gdańsk, …. Hauptthemen laut MEDLINE: Chitosan. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metallic materials for long‐term load‐bearing implants still do not provide high antimicrobial activity while maintaining strong compatibility with bone cells. This study aimed to modify the surface of Ti13Nb13Zr alloy by electrophoretic deposition of a chitosan coating with a covalently attached Arg‐Gly‐Asp (RGD) peptide. The suspensions for coating deposition were prepared in two different ways either using hydroxyacetic acid or a carbon dioxide saturation process. The coatings were deposited using a voltage of 10 V for 1 min. The prepared coatings were examined using SEM, EDS, FTIR, and XPS techniques. In addition, the wettability of these surfaces, corrosion resistance, adhesion of the coatings to the metallic substrate, and their antimicrobial activity ( E. coli , S. aureus ) and cytocompatibility properties using the MTT and LDH assays were studied. The coatings produced tightly covered the metallic substrate. Spectroscopic studies confirmed that the peptide did not detach from the chitosan chain during electrophoretic deposition. All tested samples showed high corrosion resistance (corrosion current density measured in nA/cm 2 ). The deposited coatings contributed to a significant increase in the antimicrobial activity of the samples against Gram‐positive and Gram‐negative bacteria (reduction in bacterial counts from 99% to, for CS‐RGD‐Acid and the S. aureus strain, total killing capacity). MTT and LDH results showed high compatibility with bone cells of the modified surfaces compared to the bare substrate (survival rates above 75% under indirect contact conditions and above 100% under direct contact conditions). However, the adhesion of the coatings was considered weak.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ChitosanStaphylococcus aureusCoated Materials, BiocompatibleAnti-Bacterial AgentsAlloysEscherichia coliGram-Negative BacteriaGram-Positive BacteriaOligopeptidesSuspensionsOsteoblastsTitanium

Stichwörter der Autor:innen

RGD peptideantibacterial propertiesbioactivitychitosanelectrophoretic depositiontitanium alloy

Substanzen

Chitosanarginyl-glycyl-aspartic acidCoated Materials, BiocompatibleAnti-Bacterial AgentsAlloysOligopeptidesSuspensionsTitanium

Autor:innen und Institutionen

  • Institute of Manufacturing and Materials Technology, Faculty of Mechanical Engineering and Ship Technology, Gdańsk University of Technology, Gdańsk, Poland.
  • Department of Chemistry, Technology, and Biotechnology of Food, Faculty of Chemistry, Gdańsk University of Technology, Gdańsk, Poland.
  • Department of Laboratory Medicine, Medical University of Gdańsk, Gdańsk, Poland.
  • Department of Electrochemistry, Corrosion and Materials Engineering, Faculty of Chemistry, Gdańsk University of Technology, Gdańsk, Poland.
  • Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdańsk University of Technology, Gdańsk, Poland.
  • Department of Biomedical Chemistry, Faculty of Chemistry, University of Gdańsk, Gdańsk, Poland.

ORCID-Profile: Łukasz Pawłowski, Szymon Mania, Adrianna Banach-Kopeć, Michał Bartmański, Anna Ronowska, Kacper Jurak, Aleksandra Mielewczyk-Gryń, Natalia Karska, Sylwia Rodziewicz-Motowidło, Andrzej Zieliński

Zitieren

APA

Pawłowski, Ł., Mania, S., Banach-Kopeć, A., Bartmański, M., Ronowska, A., Jurak, K., Mielewczyk-Gryń, A., Karska, N., Rodziewicz-Motowidło, S., & Zieliński, A. (2023). Osteoblast and bacterial cell response on RGD peptide‐functionalized chitosan coatings electrophoretically deposited from different suspensions on Ti13Nb13Zr alloy. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.35286

Vancouver

Pawłowski Ł, Mania S, Banach-Kopeć A, Bartmański M, Ronowska A, Jurak K, et al. Osteoblast and bacterial cell response on RGD peptide‐functionalized chitosan coatings electrophoretically deposited from different suspensions on Ti13Nb13Zr alloy. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2023. doi:10.1002/jbm.b.35286

BibTeX
@article{Pawowski2023,
  author = {Pawłowski, Łukasz and Mania, Szymon and Banach-Kopeć, Adrianna and Bartmański, Michał and Ronowska, Anna and Jurak, Kacper and Mielewczyk-Gryń, Aleksandra and Karska, Natalia and Rodziewicz-Motowidło, Sylwia and Zieliński, Andrzej},
  title = {Osteoblast and bacterial cell response on RGD peptide‐functionalized chitosan coatings electrophoretically deposited from different suspensions on Ti13Nb13Zr alloy},
  journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
  year = {2023},
  doi = {10.1002/jbm.b.35286}
}
Kostenlos starten →