Superelastic Ti‐Zr‐Nb‐Sn Thin Films Fabricated by Magnetron Sputtering: Biocompatibility and Bacterial Biofilm Formation Assessment for Orthopedic Applications
Journal of Biomedical Materials Research Part A · 2026-07 · 114 (7)
DOI: 10.1002/jbm.a.70119 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part A, online erschienen am 06.07.2026. Verfasst von Hiroki Chigama und 13 weiteren Autor:innen. Beteiligte Einrichtung: Université de technologie de Compiègne, CNRS, BMBI, Compiègne, France. Hauptthemen laut MEDLINE: Biofilms, Titanium, Staphylococcus epidermidis, Materials Testing. Die Arbeit nennt 58 Literaturangaben. Gefördert von: Agence Nationale de la Recherche.
Abstract (Originalsprache)
Nickel‐titanium (NiTi) alloys are widely used in orthopedics because of their excellent mechanical properties; however, hypersensitivity remains a concern because of Ni ion release during long‐term implantation. To address this issue, we manufactured Ti‐Zr‐xNb‐Sn thin films ( x = 10, 15, 17, 20 at.%) using magnetron‐sputtering, intended as coatings for NiTi devices. Given the superelasticity of Ti‐Zr‐Nb‐Sn alloys, these coatings are expected to not only suppress the Ni ion release from the NiTi substrate but also reduce the formation of cracks in the coating by accommodating the substrate's deformation. The biocompatibility of the coatings was evaluated both in vitro and in vivo, as well as the potential risk of forming bacterial biofilms. Ti‐Zr‐xNb‐Sn coatings ( x = 15, 17 at.%) promoted pre‐osteoblast differentiation compared to uncoated NiTi, without increasing the risk of biofilm formation by Staphylococcus epidermidis . The coated NiTi wires were implanted subcutaneously in mice for 28 days, and no strong rejection reaction was observed compared to uncoated NiTi. Additionally, the coatings showed superior corrosion resistance, indicating improved long‐term stability. The deposition angle during sputtering influenced cell differentiation, suggesting that both chemical composition and surface morphology contribute to osteogenic responses. Overall, Ti‐Zr‐Nb‐Sn coatings are a promising surface modification strategy for NiTi orthopedic implants.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Université de technologie de Compiègne, CNRS, BMBI, Compiègne, France.
- Univ Rennes, INSA Rennes, CNRS, ISCR-UMR 6226F-35000, Rennes, France.
- Institut Pprime, CNRS-Université de Poitiers-ENSMA, Poitiers, France.
- Faculty of Materials Science and Engineering, "Gheorghe Asachi" Technical University of Iasi, Iasi, Romania.
- Université de technologie de Compiègne, ESCOM, TIMR, Compiègne, France.
ORCID-Profile: Hiroki Chigama, Thibaud Choquet, Doïna Gordin, Romeu Chelariu, Antoine Fayeulle, Jean-François Grosset, Grégory Abadias, Muriel Vayssade
Förderung
- Agence Nationale de la Recherche
Zitieren
APA
Chigama, H., Choquet, T., Vigneron, P., Gordin, D., Michel, A., Chelariu, R., Cimpoeșu, R., Fayeulle, A., Grosset, J. F., Pereira, U., Gloriant, T., Abadias, G., Fillon, A., & Vayssade, M. (2026). Superelastic Ti‐Zr‐Nb‐Sn Thin Films Fabricated by Magnetron Sputtering: Biocompatibility and Bacterial Biofilm Formation Assessment for Orthopedic Applications. Journal of Biomedical Materials Research Part A, 114(7). https://doi.org/10.1002/jbm.a.70119
Vancouver
Chigama H, Choquet T, Vigneron P, Gordin D, Michel A, Chelariu R, et al. Superelastic Ti‐Zr‐Nb‐Sn Thin Films Fabricated by Magnetron Sputtering: Biocompatibility and Bacterial Biofilm Formation Assessment for Orthopedic Applications. Journal of Biomedical Materials Research Part A. 2026;114(7). doi:10.1002/jbm.a.70119
BibTeX
@article{Chigama2026,
author = {Chigama, Hiroki and Choquet, Thibaud and Vigneron, Pascale and Gordin, Doïna and Michel, Anny and Chelariu, Romeu and Cimpoeșu, Ramona and Fayeulle, Antoine and Grosset, Jean-François and Pereira, Ulysse and Gloriant, Thierry and Abadias, Grégory and Fillon, Amélie and Vayssade, Muriel},
title = {Superelastic Ti‐Zr‐Nb‐Sn Thin Films Fabricated by Magnetron Sputtering: Biocompatibility and Bacterial Biofilm Formation Assessment for Orthopedic Applications},
journal = {Journal of Biomedical Materials Research Part A},
year = {2026},
volume = {114},
number = {7},
doi = {10.1002/jbm.a.70119}
}
EUVIMED