EUVIMEDObjevte EUVIMED
Crossref

Moisture Retention Enhancement in Proton Exchange Membrane Fuel Cells Using Molybdenum disulfide as an Anode Additive

Jaya Kumar R K, Ramesh Kasimani, Shoban Babu Mani

Fuel Cells · 2026-06 · 26 (3)

DOI: 10.1002/fuce.70124 ↗

At a glance

Journal article in Fuel Cells, published online on 2026-06-16. Written by Jaya Kumar R K and 2 co-authors. 42 references.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Membrane dehydration is one of the major factors that reduces the performance of proton exchange membrane fuel cells under dry, low‐humidity conditions. This research work mainly focuses on incorporating novel molybdenum disulfide (MoS 2 ) via the hydrothermal synthesis method onto the Pt/C anode catalyst layer to promote moisture retention. Comprehensive structural (X‐ray diffraction and scanning electron microscopy‐energy‐dispersive X‐ray spectroscopy) and electrochemical assessment (cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge‐discharge) studies were performed on a coated electrode. A single cell delivers a power density of 0.59 W/cm 2 during dry conditions, which is equivalent to the performance of a cell at humidified conditions when compared to commercial Pt/C (humid: 0.45 W/cm 2 ). The findings from the result shows MoS 2 coated electrode exhibits enhanced moisture retention due to the synergistic effects of the additive.

Cite

APA

K, J. K. R., Kasimani, R., & Mani, S. B. (2026). Moisture Retention Enhancement in Proton Exchange Membrane Fuel Cells Using Molybdenum disulfide as an Anode Additive. Fuel Cells, 26(3). https://doi.org/10.1002/fuce.70124

Vancouver

K JKR, Kasimani R, Mani SB. Moisture Retention Enhancement in Proton Exchange Membrane Fuel Cells Using Molybdenum disulfide as an Anode Additive. Fuel Cells. 2026;26(3). doi:10.1002/fuce.70124

BibTeX
@article{K2026,
  author = {K, Jaya Kumar R and Kasimani, Ramesh and Mani, Shoban Babu},
  title = {Moisture Retention Enhancement in Proton Exchange Membrane Fuel Cells Using Molybdenum disulfide as an Anode Additive},
  journal = {Fuel Cells},
  year = {2026},
  volume = {26},
  number = {3},
  doi = {10.1002/fuce.70124}
}
Start for free →