EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Carbon‐Nanotubes@ MnO 2 ‐Nanosheets Core‐Shell Arrays on Carbon Cloth for High‐Performance Flexible Supercapacitor and Capacitive Deionization

Ruixi Zhao, Canyan Yang, Zhi Zheng, Chao Liu, Qiran Cai, Hai Yu, Song Zhou, Caiyun Wang, Minoo Naebe, Quanxiang Li, Lei Zhang, Ajayan Vinu and 1 more

EcoMat · 2026-08 · 8 (8)

DOI: 10.1002/eom2.70089 ↗

At a glance

Journal article in EcoMat, published online on 2026-07-26. Written by Ruixi Zhao and 12 co-authors. Cited 1 times so far (Crossref); 68 references. The full text is freely available (open access, CC BY 4.0). Funded by: Australian Research Council.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Rational electrode structure design is a key to bridging electrochemical energy storage and capacitive deionization devices. However, electrode materials are often limited by sluggish ion transport, low utilization of electroactive sites, and unstable integration between redox‐active phases and conductive frameworks. Here, we developed a proton‐coupled self‐templating hollowing‐growth strategy to construct hierarchical core‐shell arrays of hollow carbon nanotubes (CNTs) and conformal MnO 2 nanosheets (CMT). Proton‐induced etching of zinc oxide (ZnO) nanowires was coupled with concurrent deposition of redox‐active MnO 2 , yielding a hierarchical hollow architecture with conductive carbon backbones, hollow ion‐transport conduits, and accessible MnO 2 nanosheets. This integrated structure accelerates charge transfer, facilitates electrolyte penetration, and improves electroactive site utilization. As a result, the optimized CMT‐40 electrode delivers an areal capacitance of 0.52 F cm −2 at 2 mV s −1 and retains 0.25 F cm −2 at 100 mV s −1 . When assembled into a flexible asymmetric supercapacitor, the device delivered a maximum volumetric energy density of 2.85 mWh cm −3 at 25.5 mW cm −3 and retained ~1.8 mWh cm −3 at a high power density of 453.8 mW cm −3 . In capacitive deionization (CDI), the same architecture enables fast ion electrosorption and a salt adsorption capacity of 132.2 mg g −1 at 1000 ppm sodium chloride (NaCl) solution, together with good cycling stability. This work provides an effective framework for designing multifunctional hollow electrodes for integrated high‐rate energy storage and electrochemical desalination. image

Funding

  • Australian Research Council

Cite

APA

Zhao, R., Yang, C., Zheng, Z., Liu, C., Cai, Q., Yu, H., Zhou, S., Wang, C., Naebe, M., Li, Q., Zhang, L., Vinu, A., & Zhao, Y. (2026). Carbon‐Nanotubes@ MnO 2 ‐Nanosheets Core‐Shell Arrays on Carbon Cloth for High‐Performance Flexible Supercapacitor and Capacitive Deionization. EcoMat, 8(8). https://doi.org/10.1002/eom2.70089

Vancouver

Zhao R, Yang C, Zheng Z, Liu C, Cai Q, Yu H, et al. Carbon‐Nanotubes@ MnO 2 ‐Nanosheets Core‐Shell Arrays on Carbon Cloth for High‐Performance Flexible Supercapacitor and Capacitive Deionization. EcoMat. 2026;8(8). doi:10.1002/eom2.70089

BibTeX
@article{Zhao2026,
  author = {Zhao, Ruixi and Yang, Canyan and Zheng, Zhi and Liu, Chao and Cai, Qiran and Yu, Hai and Zhou, Song and Wang, Caiyun and Naebe, Minoo and Li, Quanxiang and Zhang, Lei and Vinu, Ajayan and Zhao, Yong},
  title = {Carbon‐Nanotubes@ MnO 2 ‐Nanosheets Core‐Shell Arrays on Carbon Cloth for High‐Performance Flexible Supercapacitor and Capacitive Deionization},
  journal = {EcoMat},
  year = {2026},
  volume = {8},
  number = {8},
  doi = {10.1002/eom2.70089}
}
Start for free →