EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Dissolver Setup on the Performance of Nickel‐Rich Active Material Cathodes for Lithium Ion Batteries

Tim Grenda, Hendrik Meer, Josef Keilhofer, Rüdiger Daub, Arno Kwade

Energy Technology · 2025-11 · 13 (11)

DOI: 10.1002/ente.202500331 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy Technology, online erschienen am 08.07.2025. Verfasst von Tim Grenda und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 85 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In lithium‐ion batteries, the optimization and understanding of the processing parameters and its influence on slurry, electrode, and electrochemical cell properties are becoming increasingly important. By that, so‐called process–structure–property–relations can be determined. To meet this demand, nickel‐rich lithium‐nickel‐cobalt‐manganese‐oxide materials are processed batch‐wise by a dissolver. It is shown that the choice of dissolver disk height and diameter has a significant influence on the structure of the slurry and on the physical properties of the coated electrodes. These effects can be traced by changes in stress intensity and stress frequency or stress number, respectively, and thus specific power. This, in turn, has a major influence on the electrochemical performance especially at high C‐rates. Both, too low and too high carbon black (CB) decompositions lead to increased electrical resistances. The ionic resistance, in contrast, increases with increasing CB decomposition due to the loss of intercalation spots resulting in an increased tortuosity. It is shown that an optimum ratio of all resistances exists and that an increase in capacity of 10% at 2C and 25% at 3C can be achieved by process parameters. Finally, the study offers a possibility to connect a structure quality parameter with performance parameters via structure‐property‐ and process‐structure‐functions.

Zitieren

APA

Grenda, T., Meer, H., Keilhofer, J., Daub, R., & Kwade, A. (2025). Impact of Dissolver Setup on the Performance of Nickel‐Rich Active Material Cathodes for Lithium Ion Batteries. Energy Technology, 13(11). https://doi.org/10.1002/ente.202500331

Vancouver

Grenda T, Meer H, Keilhofer J, Daub R, Kwade A. Impact of Dissolver Setup on the Performance of Nickel‐Rich Active Material Cathodes for Lithium Ion Batteries. Energy Technology. 2025;13(11). doi:10.1002/ente.202500331

BibTeX
@article{Grenda2025,
  author = {Grenda, Tim and Meer, Hendrik and Keilhofer, Josef and Daub, Rüdiger and Kwade, Arno},
  title = {Impact of Dissolver Setup on the Performance of Nickel‐Rich Active Material Cathodes for Lithium Ion Batteries},
  journal = {Energy Technology},
  year = {2025},
  volume = {13},
  number = {11},
  doi = {10.1002/ente.202500331}
}
Kostenlos starten →