EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stabilized Nickel‐Rich‐Layered Oxide Electrodes for High‐Performance Lithium‐Ion Batteries

Zahra Ahaliabadeh, Ville Miikkulainen, Miia Mäntymäki, Mattia Colalongo, Seyedabolfazl Mousavihashemi, Lide Yao, Hua Jiang, Jouko Lahtinen, Timo Kankaanpää, Tanja Kallio

ENERGY & ENVIRONMENTAL MATERIALS · 2024-11 · 7 (6)

DOI: 10.1002/eem2.12741 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ENERGY & ENVIRONMENTAL MATERIALS, online erschienen am 13.05.2024. Verfasst von Zahra Ahaliabadeh und 9 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Synchrotron Radiation Facility, Business Finland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Next‐generation Li‐ion batteries are expected to exhibit superior energy and power density, along with extended cycle life. Ni‐rich high‐capacity layered nickel manganese cobalt oxide electrode materials (NMC) hold promise in achieving these objectives, despite facing challenges such as capacity fade due to various degradation modes. Crack formation within NMC‐based cathode secondary particles, leading to parasitic reactions and the formation of inactive crystal structures, is a critical degradation mechanism. Mechanical and chemical degradation further deteriorate capacity and lifetime. To mitigate these issues, an artificial cathode electrolyte interphase can be applied to the active material before battery cycling. While atomic layer deposition (ALD) has been extensively explored for active material coatings, molecular layer deposition (MLD) offers a complementary approach. When combined with ALD, MLD enables the deposition of flexible hybrid coatings that can accommodate electrode material volume changes during battery operation. This study focuses on depositing ‐titanium terephthalate thin films on a electrode via ALD‐MLD. The electrochemical evaluation demonstrates favorable lithium‐ion kinetics and reduced electrolyte decomposition. Overall, the films deposited through ALD‐MLD exhibit promising features as flexible and protective coatings for high‐energy lithium‐ion battery electrodes, offering potential contributions to the enhancement of advanced battery technologies and supporting the growth of the EV and stationary battery industries.

Förderung

  • European Synchrotron Radiation Facility
  • Business Finland

Zitieren

APA

Ahaliabadeh, Z., Miikkulainen, V., Mäntymäki, M., Colalongo, M., Mousavihashemi, S., Yao, L., Jiang, H., Lahtinen, J., Kankaanpää, T., & Kallio, T. (2024). Stabilized Nickel‐Rich‐Layered Oxide Electrodes for High‐Performance Lithium‐Ion Batteries. ENERGY & ENVIRONMENTAL MATERIALS, 7(6). https://doi.org/10.1002/eem2.12741

Vancouver

Ahaliabadeh Z, Miikkulainen V, Mäntymäki M, Colalongo M, Mousavihashemi S, Yao L, et al. Stabilized Nickel‐Rich‐Layered Oxide Electrodes for High‐Performance Lithium‐Ion Batteries. ENERGY & ENVIRONMENTAL MATERIALS. 2024;7(6). doi:10.1002/eem2.12741

BibTeX
@article{Ahaliabadeh2024,
  author = {Ahaliabadeh, Zahra and Miikkulainen, Ville and Mäntymäki, Miia and Colalongo, Mattia and Mousavihashemi, Seyedabolfazl and Yao, Lide and Jiang, Hua and Lahtinen, Jouko and Kankaanpää, Timo and Kallio, Tanja},
  title = {Stabilized Nickel‐Rich‐Layered Oxide Electrodes for High‐Performance Lithium‐Ion Batteries},
  journal = {ENERGY & ENVIRONMENTAL MATERIALS},
  year = {2024},
  volume = {7},
  number = {6},
  doi = {10.1002/eem2.12741}
}
Kostenlos starten →