Biomechanical Implications of Abutment Geometry Modification in Polymer‐Based Dental Implant Systems
Engineering Reports · 2026-11 · 8 (11)
DOI: 10.1002/eng2.71180 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering Reports, online erschienen am 17.11.2026. Verfasst von Shuaib Al Rashid und 1 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Polymer‐based dental implant abutments offer potential advantages over conventional metallic materials but their mechanical performance is strongly influenced by material and geometric design. This study evaluates three polymeric abutment materials, PEKK, 30 wt% GFR‐PEEK and 30 wt% CFR‐PEEK, using finite element analysis under a 100 N static oblique occlusal load applied at 30° to the implant longitudinal axis. Standard and modified abutment geometries were evaluated based on equivalent stress, total deformation, equivalent elastic strain, strain energy and predicted yield load. The modified geometry reduced the maximum equivalent stress by up to 20.49% and strain energy by up to 12.59%, while increasing the predicted yield load by up to 25.74%. The highest predicted yield load was obtained with modified CFR‐PEEK at 235.2 N, compared with 187.2 N for its standard geometry. Total deformation showed only minor changes across the investigated cases. Overall, the results indicate that geometric modification can improve the mechanical response and load‐bearing capability of polymer‐based abutments without substantially affecting their deformation characteristics. Among the investigated materials, CFR‐PEEK demonstrated the highest predicted load‐bearing capacity.
Zitieren
APA
Rashid, S. A., & Rabbi, M. S. (2026). Biomechanical Implications of Abutment Geometry Modification in Polymer‐Based Dental Implant Systems. Engineering Reports, 8(11). https://doi.org/10.1002/eng2.71180
Vancouver
Rashid SA, Rabbi MS. Biomechanical Implications of Abutment Geometry Modification in Polymer‐Based Dental Implant Systems. Engineering Reports. 2026;8(11). doi:10.1002/eng2.71180
BibTeX
@article{Rashid2026,
author = {Rashid, Shuaib Al and Rabbi, M. S.},
title = {Biomechanical Implications of Abutment Geometry Modification in Polymer‐Based Dental Implant Systems},
journal = {Engineering Reports},
year = {2026},
volume = {8},
number = {11},
doi = {10.1002/eng2.71180}
}
EUVIMED