EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Simple‐mix : Thermodynamics modeling in a Gama‐type Stirling engine with a working fluid mixture

Bahram Vaziri, Mohammad Azadi, Mojtaba Biglari, Seyed Navid Madani

Engineering Reports · 2023-08 · 5 (8)

DOI: 10.1002/eng2.12656 ↗

At a glance

Journal article in Engineering Reports, published online on 2023-03-26. Written by Bahram Vaziri and 3 co-authors. Cited 3 times so far (Crossref); 28 references. The full text is freely available (open access, CC BY 4.0).

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The Stirling engine is an external combustion engine that can be utilized in electricity generation. Existing literature indicates that air is less expensive than helium as the working fluid but has the low power and efficiency. Hence, the present updated MATLAB code attempts to use a mixture of air and helium as working fluids or other mixtures of other gases. To this end, this software proposes an experimentally validated nonideal thermodynamic model for a Gama‐type Stirling engine. After validation, a mixing gas of air and helium was used instead of an operating fluid in the thermodynamic model. Finally, three examples were run to demonstrate the software outputs for a hybrid engine.

Cite

APA

Vaziri, B., Azadi, M., Biglari, M., & Madani, S. N. (2023). Simple‐mix : Thermodynamics modeling in a Gama‐type Stirling engine with a working fluid mixture. Engineering Reports, 5(8). https://doi.org/10.1002/eng2.12656

Vancouver

Vaziri B, Azadi M, Biglari M, Madani SN. Simple‐mix : Thermodynamics modeling in a Gama‐type Stirling engine with a working fluid mixture. Engineering Reports. 2023;5(8). doi:10.1002/eng2.12656

BibTeX
@article{Vaziri2023,
  author = {Vaziri, Bahram and Azadi, Mohammad and Biglari, Mojtaba and Madani, Seyed Navid},
  title = {Simple‐mix : Thermodynamics modeling in a Gama‐type Stirling engine with a working fluid mixture},
  journal = {Engineering Reports},
  year = {2023},
  volume = {5},
  number = {8},
  doi = {10.1002/eng2.12656}
}
Start for free →