Evaluation of 3D‐Printed Resin Materials for Use in Microbial Bioprocess Applications: Suitability and Autoclavability
Engineering in Life Sciences · 2026-04 · 26 (4)
DOI: 10.1002/elsc.70076 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering in Life Sciences, online erschienen am 30.03.2026. Verfasst von Carina Zierberg und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Wirtschaft und Energie.
Abstract (Originalsprache)
Three‐dimensional (3D) printing technologies are continually advancing, significantly broadening their application scope. By employing fused deposition modeling (FDM) to create iterative prototypes and stereolithography (SLA) for crafting functional components, these additive manufacturing techniques offer a highly efficient solution regarding cost and production speed. Although biocompatible materials are widely accessible, the biocompatibility of resins remains a contentious issue and requires specific evaluation for the relevant microorganisms. This study investigates the use of commercially available resins for biotechnology applications in a lab environment. Special emphasis was placed on material reuse, ensuring compatibility with autoclaving, the most common sterilization technique in laboratories. An analytical assessment was performed to identify potential leaching of polymers or resin components into the surrounding medium during autoclaving and to examine whether the materials' mechanical properties are preserved post‐sterilization. The outcomes of this study may promote the broader use of 3D printing in biotechnology research by highlighting its sustainability, resource‐saving potential, versatility, and relevance for various laboratory applications. Practical application : 3D printing has emerged as a crucial asset in research, highlighted by its versatility and adaptability. The application of synthetic resins in biotechnological contexts using stereolithography‐based 3D printing technologies has been subject to considerable criticism in the past, primarily due to verified toxic effects. Although biocompatible resins are now commercially available, their functional performance and long‐term safety have not been sufficiently studied. This study aims to facilitate the integration of 3D printing materials into standard biotechnological laboratory workflows by examining the viability of autoclaving as a sterilization technique. Additionally, for the first time, the reusability of the materials was assessed by testing their mechanical properties after multiple uses and repeated autoclaving. This approach seeks to simplify the use of 3D printing in biotechnological research, thereby facilitating its integration into routine laboratory workflows and supporting further advancements in the field.
Förderung
- Bundesministerium für Wirtschaft und Energie
Zitieren
APA
Zierberg, C., Leppkes, M., Bergstedt, U., Ulbricht, M., & Schultz, H. J. (2026). Evaluation of 3D‐Printed Resin Materials for Use in Microbial Bioprocess Applications: Suitability and Autoclavability. Engineering in Life Sciences, 26(4). https://doi.org/10.1002/elsc.70076
Vancouver
Zierberg C, Leppkes M, Bergstedt U, Ulbricht M, Schultz HJ. Evaluation of 3D‐Printed Resin Materials for Use in Microbial Bioprocess Applications: Suitability and Autoclavability. Engineering in Life Sciences. 2026;26(4). doi:10.1002/elsc.70076
BibTeX
@article{Zierberg2026,
author = {Zierberg, Carina and Leppkes, Marcus and Bergstedt, Uta and Ulbricht, Mathias and Schultz, Heyko Jürgen},
title = {Evaluation of 3D‐Printed Resin Materials for Use in Microbial Bioprocess Applications: Suitability and Autoclavability},
journal = {Engineering in Life Sciences},
year = {2026},
volume = {26},
number = {4},
doi = {10.1002/elsc.70076}
}
EUVIMED