EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Design and Characterization of a 3D‐Printable Membrane Aeration Module for Small‐Scale Bioprocess Prototyping

Laurenz Köhne, Pia Elisabeth Lorenz, Marie-Luise Schlieker, Chantal Treinen, Marius Henkel

Engineering in Life Sciences · 2026-03 · 26 (3)

DOI: 10.1002/elsc.70073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering in Life Sciences, online erschienen am 25.03.2026. Verfasst von Laurenz Köhne und 4 weiteren Autor:innen. Beteiligte Einrichtung: Cellular Agriculture, TUM School of Life Sciences Technical University of Munich Freising Germany. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Oxygen transfer is a critical design parameter in laboratory‐scale bioprocess systems used for prototyping, process development, and scale‐down studies of mammalian cell cultures, particularly when cultivating shear‐sensitive mammalian cells. In this work, we present the design and characterization of a 3D‐printed modular, membrane‐based aeration module that enables bubble‐free oxygen transfer in laboratory reference cell‐cultivation systems. The aeration module was developed as an external, small‐scale unit intended for flexible integration into laboratory bioreactors and perfusion setups. Fabricated via fused deposition modeling, the final design features a three‐chamber membrane‐stacking architecture that ensures mechanical stability, tightness, and biocompatibility, while allowing for straightforward adaptation through editable CAD files. The system was experimentally evaluated with respect to oxygen transfer performance under varying relative liquid flow rates and membrane configurations (PTFE and PVDF), each with two different pore sizes (0.22 µm and 0.45 µm). Key performance parameters of the aeration module were determined and include dissolved oxygen (DO) profiles, volumetric oxygen transfer coefficients (7.26 h −1 ), oxygen transfer rates (OTRs) (max. 61.4 mg L −1 h −1 ), and the pressure‐normalized oxygen mass transfer rate (0.87 g m − 2 bar − 1 h − 1 ). Overall, the modular design and quantified performance provide a versatile tool for rapid iteration and evaluation of membrane‐based oxygenation strategies in early‐stage bioprocess development.

Schlagwörter

Stichwörter der Autor:innen

3D‐printingcultivated meatcultured meatmembrane aerationperfusion bioreactor

Autor:innen und Institutionen

  • Cellular Agriculture, TUM School of Life Sciences Technical University of Munich Freising Germany.
  • Munich Institute of Integrated Materials, Energy and Process Engineering Technical University of Munich Garching Germany.

Zitieren

APA

Köhne, L., Lorenz, P. E., Schlieker, M. L., Treinen, C., & Henkel, M. (2026). Design and Characterization of a 3D‐Printable Membrane Aeration Module for Small‐Scale Bioprocess Prototyping. Engineering in Life Sciences, 26(3). https://doi.org/10.1002/elsc.70073

Vancouver

Köhne L, Lorenz PE, Schlieker ML, Treinen C, Henkel M. Design and Characterization of a 3D‐Printable Membrane Aeration Module for Small‐Scale Bioprocess Prototyping. Engineering in Life Sciences. 2026;26(3). doi:10.1002/elsc.70073

BibTeX
@article{Khne2026,
  author = {Köhne, Laurenz and Lorenz, Pia Elisabeth and Schlieker, Marie-Luise and Treinen, Chantal and Henkel, Marius},
  title = {Design and Characterization of a 3D‐Printable Membrane Aeration Module for Small‐Scale Bioprocess Prototyping},
  journal = {Engineering in Life Sciences},
  year = {2026},
  volume = {26},
  number = {3},
  doi = {10.1002/elsc.70073}
}
Kostenlos starten →