Progressive Cavity Pumps—A Comparison of New Technology for Gradient Bioprinting to Existing Extrusion Methods
Engineering in Life Sciences · 2026-02 · 26 (2)
DOI: 10.1002/elsc.70070 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering in Life Sciences, online erschienen am 23.02.2026. Verfasst von Franz Moser und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department for Functional Materials in Medicine and Dentistry Institute of Functional Materials and Biofabrication University of Würzburg and Key Lab…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Extrusion‐based Bioprinting is a key technology in biofabrication, yet the choice of extrusion method is often limited to established techniques built into most bioprinters, limiting the print fidelity and more demanding applications like printing material gradients. In this technical report we compare the emerging method of progressive cavity pump with established technologies such as pneumatic extrusion and syringe pump‐based printing setups. The three methods were compared for their accuracy and precision in extruding 35% Pluronic F127, followed by test simulating different flow profiles, material dependency and ability to transfer between hardware setups. The progressive cavity pumps showed the most advantageous behavior for gradient printing, with the syringe pumps needing more iterations for stable extrusion and the pneumatic extrusion enabling high‐volume extrusion but showing lower precision. This was further shown with the printing of different gradients.
Autor:innen und Institutionen
- Department for Functional Materials in Medicine and Dentistry Institute of Functional Materials and Biofabrication University of Würzburg and Key Lab Polymers for Medicine of the Bavarian Polymer Institute (BPI) Würzbur…
Zitieren
APA
Moser, F., Rahmani, S., & Jungst, T. (2026). Progressive Cavity Pumps—A Comparison of New Technology for Gradient Bioprinting to Existing Extrusion Methods. Engineering in Life Sciences, 26(2). https://doi.org/10.1002/elsc.70070
Vancouver
Moser F, Rahmani S, Jungst T. Progressive Cavity Pumps—A Comparison of New Technology for Gradient Bioprinting to Existing Extrusion Methods. Engineering in Life Sciences. 2026;26(2). doi:10.1002/elsc.70070
BibTeX
@article{Moser2026,
author = {Moser, Franz and Rahmani, Shiva and Jungst, Tomasz},
title = {Progressive Cavity Pumps—A Comparison of New Technology for Gradient Bioprinting to Existing Extrusion Methods},
journal = {Engineering in Life Sciences},
year = {2026},
volume = {26},
number = {2},
doi = {10.1002/elsc.70070}
}
EUVIMED