Bio‐Inspired Sclerotization of Lignin: A Robust Adhesive for Photothermal Wood‐Based Panels
ENERGY & ENVIRONMENTAL MATERIALS · 20.07.2026
DOI: 10.1002/eem2.70487 ↗Kurz gefasst
Fachartikel in der Zeitschrift ENERGY & ENVIRONMENTAL MATERIALS, online erschienen am 20.07.2026. Verfasst von Zihao Ye und 8 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.
Abstract (Originalsprache)
Developing formaldehyde‐free adhesives from biomass is critical for the wood‐based panel industry, yet progress is constrained by the poor bonding strength and water resistance of existing adhesives. Inspired by the sclerotization mechanism of insect exoskeletons, a high‐performance lignin adhesive is engineered using industrial alkali lignin, hyperbranched polyamide (HBPA), and a synthesized epoxide crosslinker. First, lignin is activated via ultrasonication to cleave β‐O‐4 aryl ether bonds, exposing free phenolic hydroxyl groups, which are then selectively oxidized into quinone structures. The treated lignin is subsequently grafted with HBPA to introduce a high density of amine functionalities, which ultimately form a robust network via epoxide crosslinking. The plywood bonded with this adhesive exhibits a wet shear strength of 1.02–1.21 MPa, comparable to that of conventional urea‐formaldehyde and phenolic resins. The adhesive imparts photothermal properties to the wood‐based panels: under natural outdoor sunlight, the panel surface sustained a temperature of approximately 52 °C, about 23 °C above ambient. This demonstrates a cost‐effective strategy for integrating solar‐harvesting functionality directly into structural building materials. Combined with a low material cost (~$2/kg), building energy simulations indicate a total HVAC‐load saving of 1.6%–6.5% in most heating‐dominated locations, rising to approximately 9%–10% in high‐irradiance plateau regions, supporting the panel's economic potential for energy‐saving building applications. This work presents a practical approach to developing high‐performance lignin adhesives and functional wood‐based panels and provides new insights into the efficient valorization of biomass resources.
Förderung
- Fundamental Research Funds for the Central Universities
- National Natural Science Foundation of China
Zitieren
APA
Ye, Z., Liu, Z., Wu, J., Wen, C., Xie, T., Chen, Y., Qi, C., Song, P., & Gao, Q. (2026). Bio‐Inspired Sclerotization of Lignin: A Robust Adhesive for Photothermal Wood‐Based Panels. ENERGY & ENVIRONMENTAL MATERIALS. https://doi.org/10.1002/eem2.70487
Vancouver
Ye Z, Liu Z, Wu J, Wen C, Xie T, Chen Y, et al. Bio‐Inspired Sclerotization of Lignin: A Robust Adhesive for Photothermal Wood‐Based Panels. ENERGY & ENVIRONMENTAL MATERIALS. 2026. doi:10.1002/eem2.70487
BibTeX
@article{Ye2026,
author = {Ye, Zihao and Liu, Zheng and Wu, Jiahao and Wen, Canling and Xie, Tingting and Chen, Yonggang and Qi, Chusheng and Song, Pingan and Gao, Qiang},
title = {Bio‐Inspired Sclerotization of Lignin: A Robust Adhesive for Photothermal Wood‐Based Panels},
journal = {ENERGY & ENVIRONMENTAL MATERIALS},
year = {2026},
doi = {10.1002/eem2.70487}
}
EUVIMED