EUVIMEDScopri EUVIMED
Crossref

Atomic Layer‐Deposited LSO Coating Stabilizes the Interface and Enhances the Electrochemical Performance of High‐Nickel NCM811 Cathode Material

Yao Yao, Zhongyuan Luo, Jianguo Duan, Jiyue Hou, Yongshun Liang iD, Chunman Yang, Xiaoyuan Zeng iD, Jie Xiao iD, Yiyong Zhang iD, Kaomin Zhang iD, Peng Dong, Yingjie Zhang and 1 more

ChemSusChem · 2026-11-12 · 19 (21)

DOI: 10.1002/cssc.71193 ↗

At a glance

Journal article in ChemSusChem, published online on 2026-11-04. Written by Yao Yao and 12 co-authors. Institution: National and Local Joint Engineering Research Center for Lithium-ion Batteries and Materials Preparation Technology, Key Laboratory of Advanced Batte…. 54 references. Funded by: Yunnan Provincial Key Project of Basic Research, Yunnan Fundamental Research Projects, Yunnan Technology Innovation Center of Low-Altitude Economy and UAV.

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathode material has attracted considerable attention because of its potential to achieve substantially higher energy densities, but the practical deployment of NCM811 remains hindered by severe interfacial and structural degradation during repeated cycling. Atomic layer deposition (ALD) was employed in this study to construct an amorphous Li─Si─O (LSO) coating layer with different thicknesses on the surface of NCM811 cathode materials, and their effects on the structural characteristics, interfacial properties, and electrochemical performance were systematically investigated. Among all the samples, 50 LSO@NCM811 exhibits the best electrochemical performance, retaining a discharge capacity of 115.96 mAh g −1 after 500 cycles at 1 C under a cutoff voltage of 4.3 V. By constructing a stable and ionically conductive interfacial protective layer, the LSO coating achieves the synergistic optimization of interfacial stability, structural stability, and electrochemical kinetics, thereby markedly enhancing the electrochemical performance of NCM811 cathode materials. This work provides important insights into interfacial engineering design for high‐nickel layered cathode materials of lithium‐ion batteries.

Subjects

Author keywords

LSO coatingLiNi0.8Co0.1Mn0.1O2atomic layer depositioncathode materialslithium‐ion battery

Authors and institutions

  • National and Local Joint Engineering Research Center for Lithium-ion Batteries and Materials Preparation Technology, Key Laboratory of Advanced Battery Materials of Yunnan Province, School of Metallurgical and Energy En…
  • Yunnan Technology Innovation Center of Low-Altitude Economy and UAV, Kunming University of Science and Technology, Kunming, China.

ORCID profiles: Yongshun Liang, Xiaoyuan Zeng, Jie Xiao, Yiyong Zhang, Kaomin Zhang, Yannan Zhang

Funding

  • Yunnan Provincial Key Project of Basic Research
  • Yunnan Fundamental Research Projects
  • Yunnan Technology Innovation Center of Low-Altitude Economy and UAV

Cite

APA

Yao, Y., Luo, Z., Duan, J., Hou, J., Liang, Y., Yang, C., Zeng, X., Xiao, J., Zhang, Y., Zhang, K., Dong, P., Zhang, Y., & Zhang, Y. (2026). Atomic Layer‐Deposited LSO Coating Stabilizes the Interface and Enhances the Electrochemical Performance of High‐Nickel NCM811 Cathode Material. ChemSusChem, 19(21). https://doi.org/10.1002/cssc.71193

Vancouver

Yao Y, Luo Z, Duan J, Hou J, Liang Y, Yang C, et al. Atomic Layer‐Deposited LSO Coating Stabilizes the Interface and Enhances the Electrochemical Performance of High‐Nickel NCM811 Cathode Material. ChemSusChem. 2026;19(21). doi:10.1002/cssc.71193

BibTeX
@article{Yao2026,
  author = {Yao, Yao and Luo, Zhongyuan and Duan, Jianguo and Hou, Jiyue and Liang, Yongshun and Yang, Chunman and Zeng, Xiaoyuan and Xiao, Jie and Zhang, Yiyong and Zhang, Kaomin and Dong, Peng and Zhang, Yingjie and Zhang, Yannan},
  title = {Atomic Layer‐Deposited LSO Coating Stabilizes the Interface and Enhances the Electrochemical Performance of High‐Nickel NCM811 Cathode Material},
  journal = {ChemSusChem},
  year = {2026},
  volume = {19},
  number = {21},
  doi = {10.1002/cssc.71193}
}
Start for free →