EUVIMEDAtklāt EUVIMED
Open access

Synthesized From FeVO 4 Precursor and Al 2 O 3 Modified Cathode Material Na 4 FeV(PO 4 ) 3 for Sodium Ion Batteries

Zhe Liu, Yujing Chen, Peiyao Li, Pei Yang, Zeya Tang, Xiahui Zhang iD, Junchao Zheng iD

ChemSusChem · 2026-08-14 · 19 (15)

DOI: 10.1002/cssc.70926 ↗

At a glance

Journal article in ChemSusChem, published online on 2026-07-28. Written by Zhe Liu and 6 co-authors. Institution: School of Metallurgy and Environment, Central South University, Changsha, Hunan, China. 41 references. The full text is freely available in PubMed Central. Funded by: National Natural Science Foundation of China.

AbstraktsSubjectsBibliogrāfiskie datiCiteRelated studies

Abstract (original language)

The NASICON‐type cathode Na 4 FeV(PO 4 ) 3 (NFVP) has attracted interest for its open framework and high theoretical capacity. However, current synthesis methods often introduce impurity phases, degrading electrochemical performance. Moreover, the highly oxidizing V 5+ tends to react with the electrolyte at high voltages, causing structural distortion and irreversibility of the V 4+ /V 5+ redox couple. Therefore, suppressing impurity formation and the side reactions between V 5+ and the electrolyte is key to improving high‐voltage performance. To address these issues, this study proposes a precursor‐based synthesis approach to obtain high‐purity NFVP with excellent electrochemical performance, combined with an Al 2 O 3 protective layer on the NFVP surface. The Al 2 O 3 coating minimizes direct contact between the active material and the electrolyte, effectively suppressing side reactions while enhancing structural stability. As a result, the modified cathode shows greatly improved cycling stability and rate capability in the 2.0–4.3 V range. Specifically, after 200 cycles at 1 C, capacity retention increases from 46.4% to 70%, and the specific discharge capacity at 20 C improves from 17.4 to 53.9 mAh g −1 . This work offers a feasible strategy to enhance the high‐voltage performance of NASICON‐type cathodes for sodium‐ion batteries.

Subjects

Author keywords

Na4FeV(PO4)3cathode materialinterfacial modificationsodium ion battery

Authors and institutions

  • School of Metallurgy and Environment, Central South University, Changsha, Hunan, China.
  • BASF Shanshan Battery Materials Co., Ltd., Changsha, Hunan, China.

ORCID profiles: Xiahui Zhang, Junchao Zheng

Funding

  • National Natural Science Foundation of China

Cite

APA

Liu, Z., Chen, Y., Li, P., Yang, P., Tang, Z., Zhang, X., & Zheng, J. (2026). Synthesized From FeVO 4 Precursor and Al 2 O 3 Modified Cathode Material Na 4 FeV(PO 4 ) 3 for Sodium Ion Batteries. ChemSusChem, 19(15). https://doi.org/10.1002/cssc.70926

Vancouver

Liu Z, Chen Y, Li P, Yang P, Tang Z, Zhang X, et al. Synthesized From FeVO 4 Precursor and Al 2 O 3 Modified Cathode Material Na 4 FeV(PO 4 ) 3 for Sodium Ion Batteries. ChemSusChem. 2026;19(15). doi:10.1002/cssc.70926

BibTeX
@article{Liu2026,
  author = {Liu, Zhe and Chen, Yujing and Li, Peiyao and Yang, Pei and Tang, Zeya and Zhang, Xiahui and Zheng, Junchao},
  title = {Synthesized From FeVO 4 Precursor and Al 2 O 3 Modified Cathode Material Na 4 FeV(PO 4 ) 3 for Sodium Ion Batteries},
  journal = {ChemSusChem},
  year = {2026},
  volume = {19},
  number = {15},
  doi = {10.1002/cssc.70926}
}
Start for free →