EUVIMEDUpptäck EUVIMED
Open access · CC BY-NC-ND 4.0

Spherical Lignin‐Derived Hard Carbon Anode for Sodium‐Ion Batteries

Haoming Luo, Pan Yang, Jinghao Huang, Chengxiang Chen, Nihao Cai, Yunan Qin, George Arubi Akpowu, Yun Yu, Tao Gao iD, Pratim Biswas, Chao Luo iD

ChemSusChem · 2026-08-14 · 19 (15)

DOI: 10.1002/cssc.70916 ↗

At a glance

Journal article in ChemSusChem, published online on 2026-07-25. Written by Haoming Luo and 10 co-authors. Institution: Department of Chemical, Environmental and Materials Engineering, University of Miami, Coral Gables, Florida, USA. 64 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: U.S. National Science Foundation.

AbstractSubjectsBibliografiska uppgifterCiteRelated studies

Abstract (original language)

Biomass‐derived hard carbon is a promising anode for high‐performance sodium‐ion batteries (SIBs) because of its low cost and structural tunability. Here, spherical lignin‐derived hard carbon was developed, and the carbonization temperature was tuned from 900 to 1400 °C to regulate surface chemistry, turbostratic structure, and pore texture, enabling a systematic correlation between structure evolution and electrochemical behavior. Increasing the carbonization temperature progressively reduces oxygen‐containing functional groups and shifts the initial capacity distribution toward the low‐voltage plateau region, accompanied by an increase in initial Coulombic efficiency. Consequently, the spherical hard carbon synthesized at 1300 °C exhibits a high reversible discharge capacity of 335.9 mAh g −1 at 50 mA g −1 and a long cycle life over 1600 cycles with 80.45% capacity retention at 500 mA g −1 . Moreover, high‐temperature battery tests from 20 to 80 °C with different NaPF 6 concentrations in the electrolytes show that operating temperature and NaPF 6 concentration jointly regulate the capacity. The hard carbon anode with 2 M NaPF 6 in diglyme (DEGDME) electrolyte demonstrates the increased capacity at high temperature, indicating improved high‐temperature performance. This work provides a practical strategy to develop spherical lignin‐derived hard carbon anodes for high‐temperature SIBs by coordinating carbonization temperature and electrolyte formulation.

Subjects

Author keywords

anodehard carbonhigh‐temperature batteryligninsodium‐ion battery

Authors and institutions

  • Department of Chemical, Environmental and Materials Engineering, University of Miami, Coral Gables, Florida, USA.
  • Department of Chemical Engineering, University of Utah, Salt Lake City, Utah, USA.
  • Department of Chemistry and Biochemistry, George Mason University, Fairfax, Virginia, USA.

ORCID profiles: Tao Gao, Chao Luo

Funding

  • U.S. National Science Foundation

Cite

APA

Luo, H., Yang, P., Huang, J., Chen, C., Cai, N., Qin, Y., Akpowu, G. A., Yu, Y., Gao, T., Biswas, P., & Luo, C. (2026). Spherical Lignin‐Derived Hard Carbon Anode for Sodium‐Ion Batteries. ChemSusChem, 19(15). https://doi.org/10.1002/cssc.70916

Vancouver

Luo H, Yang P, Huang J, Chen C, Cai N, Qin Y, et al. Spherical Lignin‐Derived Hard Carbon Anode for Sodium‐Ion Batteries. ChemSusChem. 2026;19(15). doi:10.1002/cssc.70916

BibTeX
@article{Luo2026,
  author = {Luo, Haoming and Yang, Pan and Huang, Jinghao and Chen, Chengxiang and Cai, Nihao and Qin, Yunan and Akpowu, George Arubi and Yu, Yun and Gao, Tao and Biswas, Pratim and Luo, Chao},
  title = {Spherical Lignin‐Derived Hard Carbon Anode for Sodium‐Ion Batteries},
  journal = {ChemSusChem},
  year = {2026},
  volume = {19},
  number = {15},
  doi = {10.1002/cssc.70916}
}
Start for free →