EUVIMEDSkopri EUVIMED
Open access · CC BY-NC 4.0

Upcycling of Waste Polymers into Porous Hard Carbon Anodes for Sodium‐Ion Batteries

Hosung Hwang iD, Jae Hoon Lee iD, Jaewon Choi, Yong-Seok Choi iD, Se Youn Cho iD

ChemSusChem · 2026-01 · 19 (2)

DOI: 10.1002/cssc.202502183 ↗

At a glance

Journal article in ChemSusChem, published online on 2026-01-29. Written by Hosung Hwang and 4 co-authors. Institution: Convergence Research Center for Recyclable Air Mobility, Materials and Platform (RAMP), Korea Institute of Science and Technology (KIST), Wanju-gun, …. Cited 3 times so far (Crossref); 83 references. The full text is freely available (open access, CC BY-NC 4.0). Funded by: the National Research Council of Science & Technology (NST) grant by the Korea government (MSIT), the Ministry of Trade, Industry & Energy, Republic of Korea.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Hard carbon has recently attracted significant attention as a promising anode material for sodium‐ion batteries (SIBs) due to its high structural stability and appreciable discharge capacity arising from pore filling of Na + . In this work, we synthesized hard carbon by carbonizing waste polymers from waste carbon fiber reinforced plastic. During the carbonization process, the heating rate was carefully controlled to exploit the gas bubbles released from the water retained in the polymers, thereby generating a porous hard carbon. The resulting porous hard carbon was subsequently employed as the anode material for SIBs. Taking advantage of the porous architecture, high‐rate electrochemical testing was performed. Notably, the sample heat‐treated at 1600°C exhibited a reversible capacity of 112.4 mAh g −1 after 700 cycles at 1 A g −1 and maintained as high as 59.1 mAh g −1 even after 7000 cycles at 2 A g −1 , underscoring its remarkable long‐term cycling stability.

Subjects

Author keywords

anodecarbon fiber reinforced plasticmesoporous hard carbonsodium‐ion batteriesupcyclingwaste epoxy polymer

Authors and institutions

  • Convergence Research Center for Recyclable Air Mobility, Materials and Platform (RAMP), Korea Institute of Science and Technology (KIST), Wanju-gun, Jeollabuk-do, Republic of Korea.
  • Department of Chemistry and Research Institute of Natural Science, Gyeongsang National University, Jinju, Kyoungnam, Republic of Korea.

ORCID profiles: Hosung Hwang, Jae Hoon Lee, Yong-Seok Choi, Se Youn Cho

Funding

  • the National Research Council of Science & Technology (NST) grant by the Korea government (MSIT)
  • the Ministry of Trade, Industry & Energy, Republic of Korea

Cite

APA

Hwang, H., Lee, J. H., Choi, J., Choi, Y. S., & Cho, S. Y. (2026). Upcycling of Waste Polymers into Porous Hard Carbon Anodes for Sodium‐Ion Batteries. ChemSusChem, 19(2). https://doi.org/10.1002/cssc.202502183

Vancouver

Hwang H, Lee JH, Choi J, Choi YS, Cho SY. Upcycling of Waste Polymers into Porous Hard Carbon Anodes for Sodium‐Ion Batteries. ChemSusChem. 2026;19(2). doi:10.1002/cssc.202502183

BibTeX
@article{Hwang2026,
  author = {Hwang, Hosung and Lee, Jae Hoon and Choi, Jaewon and Choi, Yong-Seok and Cho, Se Youn},
  title = {Upcycling of Waste Polymers into Porous Hard Carbon Anodes for Sodium‐Ion Batteries},
  journal = {ChemSusChem},
  year = {2026},
  volume = {19},
  number = {2},
  doi = {10.1002/cssc.202502183}
}
Start for free →