EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

CO 2 Reduction to Formic Acid/Formate by Intermittent Electricity at Bismuth Gas Diffusion Electrodes

Ida Dinges, Siegfried R Waldvogel iD, Markus Stöckl iD

ChemSusChem · 2025-12 · 18 (23)

DOI: 10.1002/cssc.202501583 ↗

At a glance

Journal article in ChemSusChem, published online on 2025-09-30. Written by Ida Dinges and 2 co-authors. Institution: Chemical Technology, DECHEMA Research Institute, Theodor-Heuss-Allee 25, 60486, Frankfurt am Main, Germany. Cited 5 times so far (Crossref); 49 references. The full text is freely available (open access, CC BY 4.0). Funded by: Federal Ministry of Research, Technology and Space.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

To avoid the waste of renewable energy resources beyond demand and grid capacity, innovative gas diffusion electrodes (GDE) for operation at intermittent electricity are presented. They are based on Bi as affordable and nontoxic electrocatalyst, to facilitate decentralized and cost‐efficient reduction of CO 2 to formic acid. To develop flexible GDE materials, their catalyst composition is optimized by studying systematically inexpensive Bi/Bi 2 O 3 mixtures. During initial evaluation at technically relevant current density (150 mA cm −2 , 21 h), the best composition achieve high Faradaic efficiency (FE) (≈90%) and the loss of catalyst is minor. In three demonstrative examples of realistic current patterns based on intermittent electricity, the performance and resilience of the optimized GDE is consistently very good in terms of high FE (≈90%) and stable synthesis rates of formate. However, loss of catalyst is partially increased, especially when GDEs are depolarized between electrolysis phases. Nonetheless, the GDE materials already show robust performances despite swift adjustments of current density (60 s) without any optimization of operational parameters so far. Based on these results, flexible operation of these GDE can be optimized to minimize cathodic corrosion of catalyst at long‐term operation, and thus, ultimately evaluate their implementation to valorize intermittent electricity.

Subjects

Author keywords

CO2 valorizationbismuthcathodeflexible electricity consumptionformic acid

Authors and institutions

  • Chemical Technology, DECHEMA Research Institute, Theodor-Heuss-Allee 25, 60486, Frankfurt am Main, Germany.
  • Department for Electrosynthesis, Max-Planck-Institute for Chemical Energy Conversion, Stiftstraße 34-36, 45470, Mülheim an der Ruhr, Germany.
  • Karlsruhe Institute of Technology, Institute of Biological and Chemical Systems - Functional Molecular Systems (IBCS-FMS), Kaiserstraße 12, 76131, Karlsruhe, Germany.

ORCID profiles: Siegfried R Waldvogel, Markus Stöckl

Funding

  • Federal Ministry of Research, Technology and Space

Cite

APA

Dinges, I., Waldvogel, S. R., & Stöckl, M. (2025). CO 2 Reduction to Formic Acid/Formate by Intermittent Electricity at Bismuth Gas Diffusion Electrodes. ChemSusChem, 18(23). https://doi.org/10.1002/cssc.202501583

Vancouver

Dinges I, Waldvogel SR, Stöckl M. CO 2 Reduction to Formic Acid/Formate by Intermittent Electricity at Bismuth Gas Diffusion Electrodes. ChemSusChem. 2025;18(23). doi:10.1002/cssc.202501583

BibTeX
@article{Dinges2025,
  author = {Dinges, Ida and Waldvogel, Siegfried R and Stöckl, Markus},
  title = {CO 2 Reduction to Formic Acid/Formate by Intermittent Electricity at Bismuth Gas Diffusion Electrodes},
  journal = {ChemSusChem},
  year = {2025},
  volume = {18},
  number = {23},
  doi = {10.1002/cssc.202501583}
}
Start for free →