Prototype Validation of a Large‐Scale CO 2 ‐to‐Formate Zero‐Gap Electrolyzer
ChemSusChem · 2025-09-23 · 18 (18)
DOI: 10.1002/cssc.202501116 ↗At a glance
Journal article in ChemSusChem, published online on 2025-07-25. Written by Jose Antonio Abarca and 6 co-authors. Institution: Departamento de Ingenierías Química y Biomolecular, Universidad de Cantabria, Avenida de los Castros s/n, 39005, Santander, Spain. Cited 6 times so far (Crossref); 57 references. The full text is freely available (open access, CC BY-NC 4.0). Funded by: Spanish State Research Agency, European Union's Horizon Europe research and innovation programme, predoctoral research grant.
Abstract (original language)
The scale‐up of gas‐phase CO 2 electroreduction to formate is crucial for its industrial application but remains largely unexplored. This work presents the design and validation of a 100 cm 2 electrolyzer prototype featuring a zero‐gap configuration and a serpentine flow field to ensure uniform CO 2 distribution. Scaling up a CO 2 electrolyzer requires optimized flow field design, in this case, a serpentine geometry enhances CO 2 transport and minimizes mass transfer limitations, thereby improving overall performance. Experimental prototype testing is conducted to evaluate the effects of current density and water content in the CO 2 feed. Optimal performance is achieved at 200 mA cm − 2 and a water content of 15 g h − 1 , yielding a formate concentration of 760 g L − 1 , a Faradaic efficiency of 67%, a production rate of 7 mmol m − 2 s − 1 , and an energy consumption of 507 kWh kmol − 1 . Comparisons with a 10 cm 2 lab‐scale reactor reveal improved CO 2 conversion and production rate, validating the benefits of optimized flow field design and scale‐up approach. While energy efficiency is somewhat reduced to increased Ohmic losses, the overall results support the technical feasibility of scaling gas‐phase CO 2 ‐to‐formate electrolysis. Further improvements in design and energy management are still needed to advance toward industrial implementation.
Subjects
Author keywords
Authors and institutions
- Departamento de Ingenierías Química y Biomolecular, Universidad de Cantabria, Avenida de los Castros s/n, 39005, Santander, Spain.
- Apria Systems S.L, Parque Empresarial de Morero, 39611, Guarnizo, Spain.
ORCID profiles: Jose Antonio Abarca, Guillermo Díaz-Sainz
Funding
- Spanish State Research Agency
- European Union's Horizon Europe research and innovation programme
- predoctoral research grant
- European Union-NextGenerationEU
Cite
APA
Abarca, J. A., González-Fernández, C., Peralta, C. E., Arruti, A., Santos, E., Díaz-Sainz, G., & Irabien, A. (2025). Prototype Validation of a Large‐Scale CO 2 ‐to‐Formate Zero‐Gap Electrolyzer. ChemSusChem, 18(18). https://doi.org/10.1002/cssc.202501116
Vancouver
Abarca JA, González-Fernández C, Peralta CE, Arruti A, Santos E, Díaz-Sainz G, et al. Prototype Validation of a Large‐Scale CO 2 ‐to‐Formate Zero‐Gap Electrolyzer. ChemSusChem. 2025;18(18). doi:10.1002/cssc.202501116
BibTeX
@article{Abarca2025,
author = {Abarca, Jose Antonio and González-Fernández, Cristina and Peralta, Camilo Estevan and Arruti, Axel and Santos, Esther and Díaz-Sainz, Guillermo and Irabien, Angel},
title = {Prototype Validation of a Large‐Scale CO 2 ‐to‐Formate Zero‐Gap Electrolyzer},
journal = {ChemSusChem},
year = {2025},
volume = {18},
number = {18},
doi = {10.1002/cssc.202501116}
}
EUVIMED