Prototype Validation of a Large‐Scale CO 2 ‐to‐Formate Zero‐Gap Electrolyzer
ChemSusChem · 23.09.2025 · 18 (18)
DOI: 10.1002/cssc.202501116 ↗Kurz gefasst
Fachartikel in der Zeitschrift ChemSusChem, online erschienen am 25.07.2025. Verfasst von Jose Antonio Abarca und 6 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ingenierías Química y Biomolecular, Universidad de Cantabria, Avenida de los Castros s/n, 39005, Santander, Spain. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Spanish State Research Agency, European Union's Horizon Europe research and innovation programme, predoctoral research grant.
Abstract (Originalsprache)
The scale‐up of gas‐phase CO 2 electroreduction to formate is crucial for its industrial application but remains largely unexplored. This work presents the design and validation of a 100 cm 2 electrolyzer prototype featuring a zero‐gap configuration and a serpentine flow field to ensure uniform CO 2 distribution. Scaling up a CO 2 electrolyzer requires optimized flow field design, in this case, a serpentine geometry enhances CO 2 transport and minimizes mass transfer limitations, thereby improving overall performance. Experimental prototype testing is conducted to evaluate the effects of current density and water content in the CO 2 feed. Optimal performance is achieved at 200 mA cm − 2 and a water content of 15 g h − 1 , yielding a formate concentration of 760 g L − 1 , a Faradaic efficiency of 67%, a production rate of 7 mmol m − 2 s − 1 , and an energy consumption of 507 kWh kmol − 1 . Comparisons with a 10 cm 2 lab‐scale reactor reveal improved CO 2 conversion and production rate, validating the benefits of optimized flow field design and scale‐up approach. While energy efficiency is somewhat reduced to increased Ohmic losses, the overall results support the technical feasibility of scaling gas‐phase CO 2 ‐to‐formate electrolysis. Further improvements in design and energy management are still needed to advance toward industrial implementation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Departamento de Ingenierías Química y Biomolecular, Universidad de Cantabria, Avenida de los Castros s/n, 39005, Santander, Spain.
- Apria Systems S.L, Parque Empresarial de Morero, 39611, Guarnizo, Spain.
ORCID-Profile: Jose Antonio Abarca, Guillermo Díaz-Sainz
Förderung
- Spanish State Research Agency
- European Union's Horizon Europe research and innovation programme
- predoctoral research grant
- European Union-NextGenerationEU
Zitieren
APA
Abarca, J. A., González-Fernández, C., Peralta, C. E., Arruti, A., Santos, E., Díaz-Sainz, G., & Irabien, A. (2025). Prototype Validation of a Large‐Scale CO 2 ‐to‐Formate Zero‐Gap Electrolyzer. ChemSusChem, 18(18). https://doi.org/10.1002/cssc.202501116
Vancouver
Abarca JA, González-Fernández C, Peralta CE, Arruti A, Santos E, Díaz-Sainz G, et al. Prototype Validation of a Large‐Scale CO 2 ‐to‐Formate Zero‐Gap Electrolyzer. ChemSusChem. 2025;18(18). doi:10.1002/cssc.202501116
BibTeX
@article{Abarca2025,
author = {Abarca, Jose Antonio and González-Fernández, Cristina and Peralta, Camilo Estevan and Arruti, Axel and Santos, Esther and Díaz-Sainz, Guillermo and Irabien, Angel},
title = {Prototype Validation of a Large‐Scale CO 2 ‐to‐Formate Zero‐Gap Electrolyzer},
journal = {ChemSusChem},
year = {2025},
volume = {18},
number = {18},
doi = {10.1002/cssc.202501116}
}
EUVIMED