EUVIMEDOpdag EUVIMED
Open access · CC BY-NC 4.0

3‐(Aminomethyl)piperidinium Spacer‐Induced Dion–Jacobson 2D Perovskite Beneath CsPbI 3 for Stable and Efficient Inorganic Perovskite Solar Cells

Sohyun Kang iD, Seungmin Lee, Oui Jin Oh, Dong Hyun Kim, Chan Young Kim, Sung Yong Kim, Hyojin Hong, Jeong Hyeon Park, Jun Hong Noh iD

ChemSusChem · 2025-09-23 · 18 (18)

DOI: 10.1002/cssc.202501062 ↗

At a glance

Journal article in ChemSusChem, published online on 2025-07-21. Written by Sohyun Kang and 8 co-authors. Institution: School of Civil, Environmental and Architectural Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 02841, South Korea. Cited 4 times so far (Crossref); 50 references. The full text is freely available (open access, CC BY-NC 4.0). Funded by: Korea Institute of Energy Technology Evaluation and Planning, National Research Foundation of Korea(NRF).

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

For the inorganic perovskite CsPbI 3 , while many strategies have focused on passivating the top surface, engineering the interface beneath the perovskite layer remains a critical yet underexplored avenue, primarily due to the high crystallization temperature and the dissolution of underlying layers during solution processing. Here, these longstanding challenges are addressed by introducing a strategic placement of a Dion–Jacobson quasi‐2D perovskite layer beneath CsPbI 3 . Specifically, 3‐(aminomethyl)piperidinium iodide (3AMPI 2 ), an organic salt insoluble in the CsPbI 3 precursor solution, is employed to form a robust quasi‐2D interlayer without degradation during perovskite deposition and annealing. This bottom‐layer integration passivates interfacial defects, promotes favorable crystallization of CsPbI 3 , and results in significantly enhanced device performance, achieving a power conversion efficiency of 20.98%, an open‐circuit voltage ( V oc ) of 1.21 V, a short‐circuit current density ( J sc ) of 20.59 mAcm −2 , and a fill factor of 84.21%, along with robust long‐term operational stability. The findings demonstrate a targeted interfacial design approach that unlocks new opportunities for simultaneously optimizing efficiency and stability in inorganic perovskite photovoltaics.

Subjects

Author keywords

Dion–Jacobson perovskiteburied interface engineeringinorganic perovskiteperovskite solar cellsquasi‐2D structure

Authors and institutions

  • School of Civil, Environmental and Architectural Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 02841, South Korea.
  • KU-KIST Green School Graduate School of Energy and Environment, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 02841, South Korea.

ORCID profiles: Sohyun Kang, Jun Hong Noh

Funding

  • Korea Institute of Energy Technology Evaluation and Planning
  • National Research Foundation of Korea(NRF)

Cite

APA

Kang, S., Lee, S., Oh, O. J., Kim, D. H., Kim, C. Y., Kim, S. Y., Hong, H., Park, J. H., & Noh, J. H. (2025). 3‐(Aminomethyl)piperidinium Spacer‐Induced Dion–Jacobson 2D Perovskite Beneath CsPbI 3 for Stable and Efficient Inorganic Perovskite Solar Cells. ChemSusChem, 18(18). https://doi.org/10.1002/cssc.202501062

Vancouver

Kang S, Lee S, Oh OJ, Kim DH, Kim CY, Kim SY, et al. 3‐(Aminomethyl)piperidinium Spacer‐Induced Dion–Jacobson 2D Perovskite Beneath CsPbI 3 for Stable and Efficient Inorganic Perovskite Solar Cells. ChemSusChem. 2025;18(18). doi:10.1002/cssc.202501062

BibTeX
@article{Kang2025,
  author = {Kang, Sohyun and Lee, Seungmin and Oh, Oui Jin and Kim, Dong Hyun and Kim, Chan Young and Kim, Sung Yong and Hong, Hyojin and Park, Jeong Hyeon and Noh, Jun Hong},
  title = {3‐(Aminomethyl)piperidinium Spacer‐Induced Dion–Jacobson 2D Perovskite Beneath CsPbI 3 for Stable and Efficient Inorganic Perovskite Solar Cells},
  journal = {ChemSusChem},
  year = {2025},
  volume = {18},
  number = {18},
  doi = {10.1002/cssc.202501062}
}
Start for free →