EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

3‐(Aminomethyl)piperidinium Spacer‐Induced Dion–Jacobson 2D Perovskite Beneath CsPbI 3 for Stable and Efficient Inorganic Perovskite Solar Cells

Sohyun Kang iD, Seungmin Lee, Oui Jin Oh, Dong Hyun Kim, Chan Young Kim, Sung Yong Kim, Hyojin Hong, Jeong Hyeon Park, Jun Hong Noh iD

ChemSusChem · 23.09.2025 · 18 (18)

DOI: 10.1002/cssc.202501062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemSusChem, online erschienen am 21.07.2025. Verfasst von Sohyun Kang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil, Environmental and Architectural Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 02841, South Korea. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning, National Research Foundation of Korea(NRF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For the inorganic perovskite CsPbI 3 , while many strategies have focused on passivating the top surface, engineering the interface beneath the perovskite layer remains a critical yet underexplored avenue, primarily due to the high crystallization temperature and the dissolution of underlying layers during solution processing. Here, these longstanding challenges are addressed by introducing a strategic placement of a Dion–Jacobson quasi‐2D perovskite layer beneath CsPbI 3 . Specifically, 3‐(aminomethyl)piperidinium iodide (3AMPI 2 ), an organic salt insoluble in the CsPbI 3 precursor solution, is employed to form a robust quasi‐2D interlayer without degradation during perovskite deposition and annealing. This bottom‐layer integration passivates interfacial defects, promotes favorable crystallization of CsPbI 3 , and results in significantly enhanced device performance, achieving a power conversion efficiency of 20.98%, an open‐circuit voltage ( V oc ) of 1.21 V, a short‐circuit current density ( J sc ) of 20.59 mAcm −2 , and a fill factor of 84.21%, along with robust long‐term operational stability. The findings demonstrate a targeted interfacial design approach that unlocks new opportunities for simultaneously optimizing efficiency and stability in inorganic perovskite photovoltaics.

Schlagwörter

Stichwörter der Autor:innen

Dion–Jacobson perovskiteburied interface engineeringinorganic perovskiteperovskite solar cellsquasi‐2D structure

Autor:innen und Institutionen

  • School of Civil, Environmental and Architectural Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 02841, South Korea.
  • KU-KIST Green School Graduate School of Energy and Environment, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 02841, South Korea.

ORCID-Profile: Sohyun Kang, Jun Hong Noh

Förderung

  • Korea Institute of Energy Technology Evaluation and Planning
  • National Research Foundation of Korea(NRF)

Zitieren

APA

Kang, S., Lee, S., Oh, O. J., Kim, D. H., Kim, C. Y., Kim, S. Y., Hong, H., Park, J. H., & Noh, J. H. (2025). 3‐(Aminomethyl)piperidinium Spacer‐Induced Dion–Jacobson 2D Perovskite Beneath CsPbI 3 for Stable and Efficient Inorganic Perovskite Solar Cells. ChemSusChem, 18(18). https://doi.org/10.1002/cssc.202501062

Vancouver

Kang S, Lee S, Oh OJ, Kim DH, Kim CY, Kim SY, et al. 3‐(Aminomethyl)piperidinium Spacer‐Induced Dion–Jacobson 2D Perovskite Beneath CsPbI 3 for Stable and Efficient Inorganic Perovskite Solar Cells. ChemSusChem. 2025;18(18). doi:10.1002/cssc.202501062

BibTeX
@article{Kang2025,
  author = {Kang, Sohyun and Lee, Seungmin and Oh, Oui Jin and Kim, Dong Hyun and Kim, Chan Young and Kim, Sung Yong and Hong, Hyojin and Park, Jeong Hyeon and Noh, Jun Hong},
  title = {3‐(Aminomethyl)piperidinium Spacer‐Induced Dion–Jacobson 2D Perovskite Beneath CsPbI 3 for Stable and Efficient Inorganic Perovskite Solar Cells},
  journal = {ChemSusChem},
  year = {2025},
  volume = {18},
  number = {18},
  doi = {10.1002/cssc.202501062}
}
Kostenlos starten →