EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

Chemically Recyclable Polyester Thermosets from Activated Adipic Acid and Renewable Polyols

Davide Rigo iD, Matteo Lorenzon iD, Jonas Simon iD, Bennett Addison iD, Alvise Perosa iD, Maurizio Selva iD

ChemSusChem · 2025-10 · 18 (19)

DOI: 10.1002/cssc.202500880 ↗

At a glance

Journal article in ChemSusChem, 2025-09. Written by Davide Rigo and 5 co-authors. Institution: Department of Molecular Sciences and Nanosystems, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy. Cited 2 times so far (Crossref); 81 references. The full text is freely available (open access, CC BY 4.0).

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

This study outlines a method for producing chemically recyclable crosslinked polyesters using renewable polyols — glycerol and sorbitol — combined with adipic acid (AA), which is transformed/activated into a polyanhydride mixture prior to use. A three‐step procedure has been designed: 1) an acid‐catalyzed reaction of AA with nontoxic isopropenyl acetate or acetic anhydride to form a crosslinking mixture (CLM) made of adipic‐acetic mixed polyanhydrides; 2) a solvent‐ and additive‐free process where glycerol or sorbitol, or a combination thereof, is reacted with the CLM to achieve a prepolymer, and 3) a casting/molding of the liquid viscous prepolymer to yield a thermoset as the end product. Different thermosets (eight examples) are prepared by changing the reagents ratio. These solids are thoroughly characterized by tensile tests, DMA, high‐resolution magic angle spinning and solid‐state NMR, thermal gravimetric analysis, DSC, and fourier transformed infra red (FT‐IR) spectroscopy. The formation of cross‐linked polyesters is confirmed in all cases, but mechanical properties varied significantly from one specimen to another. Interestingly, a tensile strength up to 18 MPa — approximately an order of magnitude higher than similar polymers — is achieved when sorbitol and the CLM are used in a 1:1 wt% ratio. The chemical recycle of the resulting polymers is achieved via methanolysis with quantitative recovery of the monomeric units.

Subjects

Author keywords

bioplasticschemical recyclingisopropenyl acetatesolvent‐freeupcycling

Authors and institutions

  • Department of Molecular Sciences and Nanosystems, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy.
  • Department of Chemistry, Institute of Chemistry of Renewable Resources, University of Natural Resources and Life Sciences Vienna (BOKU), Konrad-Lorenz-Strasse 24, 3430, Tulln, Austria.
  • Renewable Resources and Enabling Sciences Institute of Chemistry of Renewable Resources, National Renewable Energy Laboratory, Golden, Colorado, 80401, United States.

ORCID profiles: Davide Rigo, Matteo Lorenzon, Jonas Simon, Bennett Addison, Alvise Perosa, Maurizio Selva

Cite

APA

Rigo, D., Lorenzon, M., Simon, J., Addison, B., Perosa, A., & Selva, M. (2025). Chemically Recyclable Polyester Thermosets from Activated Adipic Acid and Renewable Polyols. ChemSusChem, 18(19). https://doi.org/10.1002/cssc.202500880

Vancouver

Rigo D, Lorenzon M, Simon J, Addison B, Perosa A, Selva M. Chemically Recyclable Polyester Thermosets from Activated Adipic Acid and Renewable Polyols. ChemSusChem. 2025;18(19). doi:10.1002/cssc.202500880

BibTeX
@article{Rigo2025,
  author = {Rigo, Davide and Lorenzon, Matteo and Simon, Jonas and Addison, Bennett and Perosa, Alvise and Selva, Maurizio},
  title = {Chemically Recyclable Polyester Thermosets from Activated Adipic Acid and Renewable Polyols},
  journal = {ChemSusChem},
  year = {2025},
  volume = {18},
  number = {19},
  doi = {10.1002/cssc.202500880}
}
Start for free →