Chemically Recyclable Polyester Thermosets from Activated Adipic Acid and Renewable Polyols
ChemSusChem · 2025-10 · 18 (19)
DOI: 10.1002/cssc.202500880 ↗Kurz gefasst
Fachartikel in der Zeitschrift ChemSusChem, 2025-09. Verfasst von Davide Rigo und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Molecular Sciences and Nanosystems, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study outlines a method for producing chemically recyclable crosslinked polyesters using renewable polyols — glycerol and sorbitol — combined with adipic acid (AA), which is transformed/activated into a polyanhydride mixture prior to use. A three‐step procedure has been designed: 1) an acid‐catalyzed reaction of AA with nontoxic isopropenyl acetate or acetic anhydride to form a crosslinking mixture (CLM) made of adipic‐acetic mixed polyanhydrides; 2) a solvent‐ and additive‐free process where glycerol or sorbitol, or a combination thereof, is reacted with the CLM to achieve a prepolymer, and 3) a casting/molding of the liquid viscous prepolymer to yield a thermoset as the end product. Different thermosets (eight examples) are prepared by changing the reagents ratio. These solids are thoroughly characterized by tensile tests, DMA, high‐resolution magic angle spinning and solid‐state NMR, thermal gravimetric analysis, DSC, and fourier transformed infra red (FT‐IR) spectroscopy. The formation of cross‐linked polyesters is confirmed in all cases, but mechanical properties varied significantly from one specimen to another. Interestingly, a tensile strength up to 18 MPa — approximately an order of magnitude higher than similar polymers — is achieved when sorbitol and the CLM are used in a 1:1 wt% ratio. The chemical recycle of the resulting polymers is achieved via methanolysis with quantitative recovery of the monomeric units.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Molecular Sciences and Nanosystems, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy.
- Department of Chemistry, Institute of Chemistry of Renewable Resources, University of Natural Resources and Life Sciences Vienna (BOKU), Konrad-Lorenz-Strasse 24, 3430, Tulln, Austria.
- Renewable Resources and Enabling Sciences Institute of Chemistry of Renewable Resources, National Renewable Energy Laboratory, Golden, Colorado, 80401, United States.
ORCID-Profile: Davide Rigo, Matteo Lorenzon, Jonas Simon, Bennett Addison, Alvise Perosa, Maurizio Selva
Zitieren
APA
Rigo, D., Lorenzon, M., Simon, J., Addison, B., Perosa, A., & Selva, M. (2025). Chemically Recyclable Polyester Thermosets from Activated Adipic Acid and Renewable Polyols. ChemSusChem, 18(19). https://doi.org/10.1002/cssc.202500880
Vancouver
Rigo D, Lorenzon M, Simon J, Addison B, Perosa A, Selva M. Chemically Recyclable Polyester Thermosets from Activated Adipic Acid and Renewable Polyols. ChemSusChem. 2025;18(19). doi:10.1002/cssc.202500880
BibTeX
@article{Rigo2025,
author = {Rigo, Davide and Lorenzon, Matteo and Simon, Jonas and Addison, Bennett and Perosa, Alvise and Selva, Maurizio},
title = {Chemically Recyclable Polyester Thermosets from Activated Adipic Acid and Renewable Polyols},
journal = {ChemSusChem},
year = {2025},
volume = {18},
number = {19},
doi = {10.1002/cssc.202500880}
}
EUVIMED