Rational Design and Electrochemical Mechanism of High‐Capacity Quadruple Layered Oxide Cathode Materials for Rechargeable Sodium‐Ion Batteries
ChemSusChem · 2025-09-23 · 18 (18)
DOI: 10.1002/cssc.202500567 ↗At a glance
Journal article in ChemSusChem, published online on 2025-07-21. Written by Yangyang Zhang and 4 co-authors. Institution: College of Chemistry & Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin, 150040, China. Cited 6 times so far (Crossref); 47 references. Funded by: Fundamental Research Funds for the Central Universities.
Abstract (original language)
O3‐type layered oxides are strongly considered as a promising cathode material for rechargeable sodium‐ion batteries due to the high theoretical capacity and low‐cost raw materials, but are challenged by poor electrochemical performance over Na extraction above 4.0 V. Herein, a novel quadruple layered oxide is rationally designed by regulating Fe doping in the representative NaNi 0.5 Ti 0.25 Mn 0.25 O 2 composition, and influence of Fe doping on structure and electrochemistry of the NaNi 0.5‐ x /2 Ti 0.25‐ x /2 Fe x Mn 0.25 O 2 (0 ≤ x ≤ 0.30) material is systematically investigated with X‐ray diffraction (XRD), transmission electron microscope, cyclic voltammetry, and galvanostatic measurement. It is found that the favorable quadruple structure enables the optimized NaNi 0.45 Ti 0.2 Fe 0.1 Mn 0.25 O 2 material to show superior electrochemical performance with a large practical capacity of 157 mAh g −1 at 10 mA g −1 and a high‐capacity retention of 81% after 100 cycles at 100 mA g −1 . Furthermore, the phase transitions and redox reactions are analyzed by using ex situ XRD and X‐ray photoelectron spectroscopy. In addition, the cycling degradation of the materials during cycling is understood with d Q /d V curves and XRD technique. The results in this study indicate the effectiveness of the dual‐cationic substitution strategy in designing high‐performance layered oxides cathode, and suggest significant impact of cationic migration on their capacity degradation and voltage hysteresis during cycling.
Subjects
Author keywords
Authors and institutions
- College of Chemistry & Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin, 150040, China.
- Center for Innovative Research in Synthetic Chemistry and Resource Utilization, Northeast Forestry University, Harbin, 150040, China.
ORCID profiles: Xingde Xiang
Funding
- Fundamental Research Funds for the Central Universities
Cite
APA
Zhang, Y., Wang, M., Bai, Y., Fu, W., & Xiang, X. (2025). Rational Design and Electrochemical Mechanism of High‐Capacity Quadruple Layered Oxide Cathode Materials for Rechargeable Sodium‐Ion Batteries. ChemSusChem, 18(18). https://doi.org/10.1002/cssc.202500567
Vancouver
Zhang Y, Wang M, Bai Y, Fu W, Xiang X. Rational Design and Electrochemical Mechanism of High‐Capacity Quadruple Layered Oxide Cathode Materials for Rechargeable Sodium‐Ion Batteries. ChemSusChem. 2025;18(18). doi:10.1002/cssc.202500567
BibTeX
@article{Zhang2025,
author = {Zhang, Yangyang and Wang, Meijing and Bai, Yu and Fu, Wenhua and Xiang, Xingde},
title = {Rational Design and Electrochemical Mechanism of High‐Capacity Quadruple Layered Oxide Cathode Materials for Rechargeable Sodium‐Ion Batteries},
journal = {ChemSusChem},
year = {2025},
volume = {18},
number = {18},
doi = {10.1002/cssc.202500567}
}
EUVIMED