An Iron‐Based Fluorophosphate Cathode Material for K‐Ion Batteries
ChemSusChem · 2025-04 · 18 (7)
DOI: 10.1002/cssc.202401935 ↗At a glance
Journal article in ChemSusChem, published online on 2024-11-25. Written by Dipannita Saha and 7 co-authors. Institution: Advanced Batteries and Ceramics Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mum…. Cited 3 times so far (Crossref); 20 references. Funded by: SAIF, ICCF (IIT Bombay), CSIR, Govt. of India.
Abstract (original language)
The development of a tavorite structured K‐ transition metal (T M )‐ fluorophosphate, having earth‐abundant Fe as the only T M , crystallizing in the orthorhombic crystal system and facilitating stable‐cum‐reversible electrochemical K‐extraction/insertion, has been reported here. Synthesized using low‐cost precursors, KFePO 4 F has also been found to be air‐stable. Detailed information pertaining to the bonding/structure, including lattice site occupancy, have been obtained via diffraction, Raman spectroscopy and FTIR, with XPS, Mössbauer and ESR revealing the oxidation states and nature of Fe in the as‐synthesized condition and upon being subjected to electrochemical potassiation/depotassiation. The electrochemical K‐insertion/extraction, supported by reversible Fe‐redox, leads to a reversible K‐storage capacity of ~102 mAh/g (within 1.5–4.0 V), along with a 1 st cycle Coulombic efficiency (CE) of ~93 % (with CE>99.9 % from 2 nd cycle onwards). Ex‐situ X‐ray diffraction, as well as operando synchrotron diffraction during galvanostatic cycling, indicates reversible changes in peak positions upon electrochemical K‐extraction/insertion, with no evidence for structural change. When used as cathode material in K‐ion ‘full’ cell (with hard carbon‐based anode), a discharge capacity of ~68 mAh/g, along with capacity retention of ~70 % after 50 cycles, has been obtained; which confirms that this newly‐developed earth‐abundant Fe‐based potassium fluorophosphate can be utilized for potential application in sustainable battery chemistries, like K‐ion batteries.
Subjects
Author keywords
Authors and institutions
- Advanced Batteries and Ceramics Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai, 400076, India.
- UGC-DAE Consortium for Scientific Research, University Campus, Khandwa Road, Indore, India.
- High Pressure and Synchrotron Radiation Physics Division, Bhabha Atomic Research Center, Mumbai, India.
ORCID profiles: Amartya Mukhopadhyay
Funding
- SAIF
- ICCF (IIT Bombay)
- CSIR, Govt. of India
- Sophisticated Analytical Instrument Facility
Cite
APA
Saha, D., Desai, P., Sharma, A., Raghavendra Reddy, V., Srihari, V., Poswal, H. K., Das, A., & Mukhopadhyay, A. (2025). An Iron‐Based Fluorophosphate Cathode Material for K‐Ion Batteries. ChemSusChem, 18(7). https://doi.org/10.1002/cssc.202401935
Vancouver
Saha D, Desai P, Sharma A, Raghavendra Reddy V, Srihari V, Poswal HK, et al. An Iron‐Based Fluorophosphate Cathode Material for K‐Ion Batteries. ChemSusChem. 2025;18(7). doi:10.1002/cssc.202401935
BibTeX
@article{Saha2025,
author = {Saha, Dipannita and Desai, Parth and Sharma, Ankur and Raghavendra Reddy, V and Srihari, Velaga and Poswal, Himanshu K and Das, Arpita and Mukhopadhyay, Amartya},
title = {An Iron‐Based Fluorophosphate Cathode Material for K‐Ion Batteries},
journal = {ChemSusChem},
year = {2025},
volume = {18},
number = {7},
doi = {10.1002/cssc.202401935}
}
EUVIMED