EUVIMEDEUVIMED entdecken
Crossref

An Iron‐Based Fluorophosphate Cathode Material for K‐Ion Batteries

Dipannita Saha, Parth Desai, Ankur Sharma, V Raghavendra Reddy, Velaga Srihari, Himanshu K Poswal, Arpita Das, Amartya Mukhopadhyay iD

ChemSusChem · 2025-04 · 18 (7)

DOI: 10.1002/cssc.202401935 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemSusChem, online erschienen am 25.11.2024. Verfasst von Dipannita Saha und 7 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Batteries and Ceramics Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mum…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 20 Literaturangaben. Gefördert von: SAIF, ICCF (IIT Bombay), CSIR, Govt. of India.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of a tavorite structured K‐ transition metal (T M )‐ fluorophosphate, having earth‐abundant Fe as the only T M , crystallizing in the orthorhombic crystal system and facilitating stable‐cum‐reversible electrochemical K‐extraction/insertion, has been reported here. Synthesized using low‐cost precursors, KFePO 4 F has also been found to be air‐stable. Detailed information pertaining to the bonding/structure, including lattice site occupancy, have been obtained via diffraction, Raman spectroscopy and FTIR, with XPS, Mössbauer and ESR revealing the oxidation states and nature of Fe in the as‐synthesized condition and upon being subjected to electrochemical potassiation/depotassiation. The electrochemical K‐insertion/extraction, supported by reversible Fe‐redox, leads to a reversible K‐storage capacity of ~102 mAh/g (within 1.5–4.0 V), along with a 1 st cycle Coulombic efficiency (CE) of ~93 % (with CE>99.9 % from 2 nd cycle onwards). Ex‐situ X‐ray diffraction, as well as operando synchrotron diffraction during galvanostatic cycling, indicates reversible changes in peak positions upon electrochemical K‐extraction/insertion, with no evidence for structural change. When used as cathode material in K‐ion ‘full’ cell (with hard carbon‐based anode), a discharge capacity of ~68 mAh/g, along with capacity retention of ~70 % after 50 cycles, has been obtained; which confirms that this newly‐developed earth‐abundant Fe‐based potassium fluorophosphate can be utilized for potential application in sustainable battery chemistries, like K‐ion batteries.

Schlagwörter

Stichwörter der Autor:innen

CathodeElectrochemical energy storageFe-redoxPolyanionPotassium-ion battery

Autor:innen und Institutionen

  • Advanced Batteries and Ceramics Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai, 400076, India.
  • UGC-DAE Consortium for Scientific Research, University Campus, Khandwa Road, Indore, India.
  • High Pressure and Synchrotron Radiation Physics Division, Bhabha Atomic Research Center, Mumbai, India.

ORCID-Profile: Amartya Mukhopadhyay

Förderung

  • SAIF
  • ICCF (IIT Bombay)
  • CSIR, Govt. of India
  • Sophisticated Analytical Instrument Facility

Zitieren

APA

Saha, D., Desai, P., Sharma, A., Raghavendra Reddy, V., Srihari, V., Poswal, H. K., Das, A., & Mukhopadhyay, A. (2025). An Iron‐Based Fluorophosphate Cathode Material for K‐Ion Batteries. ChemSusChem, 18(7). https://doi.org/10.1002/cssc.202401935

Vancouver

Saha D, Desai P, Sharma A, Raghavendra Reddy V, Srihari V, Poswal HK, et al. An Iron‐Based Fluorophosphate Cathode Material for K‐Ion Batteries. ChemSusChem. 2025;18(7). doi:10.1002/cssc.202401935

BibTeX
@article{Saha2025,
  author = {Saha, Dipannita and Desai, Parth and Sharma, Ankur and Raghavendra Reddy, V and Srihari, Velaga and Poswal, Himanshu K and Das, Arpita and Mukhopadhyay, Amartya},
  title = {An Iron‐Based Fluorophosphate Cathode Material for K‐Ion Batteries},
  journal = {ChemSusChem},
  year = {2025},
  volume = {18},
  number = {7},
  doi = {10.1002/cssc.202401935}
}
Kostenlos starten →