EUVIMEDScopri EUVIMED
Open access · CC BY-NC-ND 4.0

A Simple Regeneration Process Using a CO 2 ‐Switchable‐Polarity Solvent for Cellulose Hydrogels

Arata Matsui, Deandra Ayu Putri, Morgan L Thomas iD, Yuko Takeoka iD, Masahiro Rikukawa iD, Masahiro Yoshizawa-Fujita iD

ChemSusChem · 2025-03-15 · 18 (6)

DOI: 10.1002/cssc.202401848 ↗

At a glance

Journal article in ChemSusChem, published online on 2024-11-20. Written by Arata Matsui and 5 co-authors. Institution: Department of Materials and Life Sciences, Sophia University, 7-1 Kioi-cho, Chiyoda-ku, Tokyo, 102-8554, Japan. Cited 1 times so far (Crossref); 44 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Sophia University.

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

Cellulose is one of the main components of plant cell walls, abundant on earth, and can be acquired at a low cost. Furthermore, there has been increasing interest in its use in environmentally friendly, carbon‐neutral, sustainable materials. It is expected that the applications of cellulose will expand with the development of a simple processing method. In this study, we dissolved cellulose in aqueous N ‐butyl‐ N ‐methylpyrrolidinium hydroxide solution ([C 4 mpyr][OH]/H 2 O) and investigated the cellulose regeneration process based on changes in solubility upon application of CO 2 gas. We investigated the effect of transformation of the anion chemical structure on cellulose solubility by flowing CO 2 gas into [C 4 mpyr][OH]/H 2 O and conducted pH, FT‐IR, and 13 C NMR measurements. We observed that the changes in anion structure allowed for the modulation of cellulose solubility in [C 4 mpyr][OH]/H 2 O, thus establishing a simple and safe cellulose regeneration process. This regeneration process was also applied to enable the production of cellulose hydrogels. The hydrogel formed using this method was revealed to have higher mechanical strength than an analogous hydrogel produced using the same dissolution solvent with the addition of a cross‐linker. The ability to produce cellulose‐based hydrogels of different mechanical properties is expected to expand the possible applications.

Subjects

Author keywords

CO2CelluloseHydrogelPyrrolidinium hydroxideRegeneration process

Authors and institutions

  • Department of Materials and Life Sciences, Sophia University, 7-1 Kioi-cho, Chiyoda-ku, Tokyo, 102-8554, Japan.
  • Present address: Graduate School of Science and Technology, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama, Kanagawa, 223-8522, Japan.

ORCID profiles: Morgan L Thomas, Yuko Takeoka, Masahiro Rikukawa, Masahiro Yoshizawa-Fujita

Funding

  • Sophia University

Cite

APA

Matsui, A., Ayu Putri, D., Thomas, M. L., Takeoka, Y., Rikukawa, M., & Yoshizawa-Fujita, M. (2025). A Simple Regeneration Process Using a CO 2 ‐Switchable‐Polarity Solvent for Cellulose Hydrogels. ChemSusChem, 18(6). https://doi.org/10.1002/cssc.202401848

Vancouver

Matsui A, Ayu Putri D, Thomas ML, Takeoka Y, Rikukawa M, Yoshizawa-Fujita M. A Simple Regeneration Process Using a CO 2 ‐Switchable‐Polarity Solvent for Cellulose Hydrogels. ChemSusChem. 2025;18(6). doi:10.1002/cssc.202401848

BibTeX
@article{Matsui2025,
  author = {Matsui, Arata and Ayu Putri, Deandra and Thomas, Morgan L and Takeoka, Yuko and Rikukawa, Masahiro and Yoshizawa-Fujita, Masahiro},
  title = {A Simple Regeneration Process Using a CO 2 ‐Switchable‐Polarity Solvent for Cellulose Hydrogels},
  journal = {ChemSusChem},
  year = {2025},
  volume = {18},
  number = {6},
  doi = {10.1002/cssc.202401848}
}
Start for free →