EUVIMEDOpdag EUVIMED
Crossref

Hydrogen and Solid Carbon Production via Methane Pyrolysis in a Rotating Gliding Arc Plasma Reactor

Zulfiqar Ali iD, Hohyun Song, Uyen Nhat Trieu Nguyen, Hyung Cheoul Shim, Seung-Mo Lee, Muhammad Majeed, Dae Hoon Lee iD

ChemSusChem · 2025-04 · 18 (7)

DOI: 10.1002/cssc.202401602 ↗

At a glance

Journal article in ChemSusChem, published online on 2024-11-25. Written by Zulfiqar Ali and 6 co-authors. Institution: Korea Institute of Machinery and Materials (KIMM), 156 Gajeongbuk-ro, Yuseong-gu, 34103, Daejeon, South Korea. Cited 24 times so far (Crossref); 69 references. Funded by: National Research Foundation of Korea, Ministry of Trade, Industry & Energy.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Plasma‐induced methane pyrolysis is a promising hydrogen production method. However, few studies have focused the decomposition of pure methane as a discharge gas. Herein, a rotating gliding arc reactor was used for the conversion of methane (discharge gas and feedstock) into hydrogen and solid carbon. Methane conversion, gaseous product selectivity, and energy usage efficiency (specific energy requirement for hydrogen production (SER)) were investigated as functions of operating parameters, e. g., specific energy input (SEI), residence time, and reactor design. SEI was positively (almost linearly) correlated with methane conversion and hydrogen yield and negatively correlated with SER. Conversion and efficiency of energy usage increased when reactor designs providing higher thermal densities were used. With the increasing flow rate of methane at constant SEI, the reaction volume and, hence, the effective residence time of the gas inside the reaction zone increased, which resulted in methane conversion and hydrogen selectivity enhancement. The solid carbon featured four distinct domains, namely graphitic carbon, turbostratic carbon, multi‐layer graphene, and amorphous carbon, which indicated a nonuniform temperature distribution in the reaction zone. But it seems that graphitic carbon dominates amorhphous one. This study highlights the potential of rotating gliding arc plasma systems for efficient methane conversion into hydrogen and valuable solid carbon products.

Subjects

Author keywords

HydrogenPlasma pyrolysisPure methane dischargeRotating gliding arcSolid carbon

Authors and institutions

  • Korea Institute of Machinery and Materials (KIMM), 156 Gajeongbuk-ro, Yuseong-gu, 34103, Daejeon, South Korea.
  • Korea University of Science and Technology (UST), 217 Gajeong-ro, Yuseong-gu, 34113, Daejeon, South Korea.

ORCID profiles: Zulfiqar Ali, Dae Hoon Lee

Funding

  • National Research Foundation of Korea
  • Ministry of Trade, Industry & Energy

Cite

APA

Ali, Z., Song, H., Trieu Nguyen, U. N., Shim, H. C., Lee, S. M., Majeed, M., & Lee, D. H. (2025). Hydrogen and Solid Carbon Production via Methane Pyrolysis in a Rotating Gliding Arc Plasma Reactor. ChemSusChem, 18(7). https://doi.org/10.1002/cssc.202401602

Vancouver

Ali Z, Song H, Trieu Nguyen UN, Shim HC, Lee SM, Majeed M, et al. Hydrogen and Solid Carbon Production via Methane Pyrolysis in a Rotating Gliding Arc Plasma Reactor. ChemSusChem. 2025;18(7). doi:10.1002/cssc.202401602

BibTeX
@article{Ali2025,
  author = {Ali, Zulfiqar and Song, Hohyun and Trieu Nguyen, Uyen Nhat and Shim, Hyung Cheoul and Lee, Seung-Mo and Majeed, Muhammad and Lee, Dae Hoon},
  title = {Hydrogen and Solid Carbon Production via Methane Pyrolysis in a Rotating Gliding Arc Plasma Reactor},
  journal = {ChemSusChem},
  year = {2025},
  volume = {18},
  number = {7},
  doi = {10.1002/cssc.202401602}
}
Start for free →