EUVIMEDEUVIMED entdecken
Crossref

Hydrogen and Solid Carbon Production via Methane Pyrolysis in a Rotating Gliding Arc Plasma Reactor

Zulfiqar Ali iD, Hohyun Song, Uyen Nhat Trieu Nguyen, Hyung Cheoul Shim, Seung-Mo Lee, Muhammad Majeed, Dae Hoon Lee iD

ChemSusChem · 2025-04 · 18 (7)

DOI: 10.1002/cssc.202401602 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemSusChem, online erschienen am 25.11.2024. Verfasst von Zulfiqar Ali und 6 weiteren Autor:innen. Beteiligte Einrichtung: Korea Institute of Machinery and Materials (KIMM), 156 Gajeongbuk-ro, Yuseong-gu, 34103, Daejeon, South Korea. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 69 Literaturangaben. Gefördert von: National Research Foundation of Korea, Ministry of Trade, Industry & Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plasma‐induced methane pyrolysis is a promising hydrogen production method. However, few studies have focused the decomposition of pure methane as a discharge gas. Herein, a rotating gliding arc reactor was used for the conversion of methane (discharge gas and feedstock) into hydrogen and solid carbon. Methane conversion, gaseous product selectivity, and energy usage efficiency (specific energy requirement for hydrogen production (SER)) were investigated as functions of operating parameters, e. g., specific energy input (SEI), residence time, and reactor design. SEI was positively (almost linearly) correlated with methane conversion and hydrogen yield and negatively correlated with SER. Conversion and efficiency of energy usage increased when reactor designs providing higher thermal densities were used. With the increasing flow rate of methane at constant SEI, the reaction volume and, hence, the effective residence time of the gas inside the reaction zone increased, which resulted in methane conversion and hydrogen selectivity enhancement. The solid carbon featured four distinct domains, namely graphitic carbon, turbostratic carbon, multi‐layer graphene, and amorphous carbon, which indicated a nonuniform temperature distribution in the reaction zone. But it seems that graphitic carbon dominates amorhphous one. This study highlights the potential of rotating gliding arc plasma systems for efficient methane conversion into hydrogen and valuable solid carbon products.

Schlagwörter

Stichwörter der Autor:innen

HydrogenPlasma pyrolysisPure methane dischargeRotating gliding arcSolid carbon

Autor:innen und Institutionen

  • Korea Institute of Machinery and Materials (KIMM), 156 Gajeongbuk-ro, Yuseong-gu, 34103, Daejeon, South Korea.
  • Korea University of Science and Technology (UST), 217 Gajeong-ro, Yuseong-gu, 34113, Daejeon, South Korea.

ORCID-Profile: Zulfiqar Ali, Dae Hoon Lee

Förderung

  • National Research Foundation of Korea
  • Ministry of Trade, Industry & Energy

Zitieren

APA

Ali, Z., Song, H., Trieu Nguyen, U. N., Shim, H. C., Lee, S. M., Majeed, M., & Lee, D. H. (2025). Hydrogen and Solid Carbon Production via Methane Pyrolysis in a Rotating Gliding Arc Plasma Reactor. ChemSusChem, 18(7). https://doi.org/10.1002/cssc.202401602

Vancouver

Ali Z, Song H, Trieu Nguyen UN, Shim HC, Lee SM, Majeed M, et al. Hydrogen and Solid Carbon Production via Methane Pyrolysis in a Rotating Gliding Arc Plasma Reactor. ChemSusChem. 2025;18(7). doi:10.1002/cssc.202401602

BibTeX
@article{Ali2025,
  author = {Ali, Zulfiqar and Song, Hohyun and Trieu Nguyen, Uyen Nhat and Shim, Hyung Cheoul and Lee, Seung-Mo and Majeed, Muhammad and Lee, Dae Hoon},
  title = {Hydrogen and Solid Carbon Production via Methane Pyrolysis in a Rotating Gliding Arc Plasma Reactor},
  journal = {ChemSusChem},
  year = {2025},
  volume = {18},
  number = {7},
  doi = {10.1002/cssc.202401602}
}
Kostenlos starten →