Unraveling the Role of CuO in Cu x O/TiO 2 Photocatalyst for the Direct Propylene Epoxidation With O 2 in a Fluidized Bed Reactor
ChemSusChem · 2025-04-14 · 18 (8)
DOI: 10.1002/cssc.202401546 ↗At a glance
Journal article in ChemSusChem, published online on 2024-12-06. Written by Nicola Morante and 8 co-authors. Institution: Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II 132, 84084, Fisciano (SA), Italy. Cited 7 times so far (Crossref); 88 references.
Abstract (original language)
Propylene epoxidation in mild conditions using molecular O 2 is a highly desirable reaction that represents a significant challenge in the field of heterogeneous catalysis for the synthesis of oxygenated organic compounds of industrial interest. In this work, Cu x O/TiO 2 composites with different mominal CuO loadings (in the range of 0.5–8.4 wt %) were used to promote the photocatalytic epoxidation of propylene with molecular oxygen under UV‐A irradiation in a fluidized bed system. The photocatalysts were prepared by a straightforward method consisting of thermal annealing of physical mixtures between copper acetate and sol‐gel‐derived TiO 2 . Different characterization techniques were employed to assess the influence of Cu x O content on the physical‐chemical properties of the Cu x O/TiO 2 composites. The best combination in terms of propylene conversion and selectivity towards propylene oxide (18.1 % and 72 %, respectively) was obtained with Cu x O/TiO 2 at 1.1 wt % CuO, as shown by photocatalytic tests. The high propylene oxide selectivity is due to the ability of CuO in the Cu x O/TiO 2 composite to transform molecular O 2 into hydrogen peroxide that, in turn, is able to directly oxidize propylene to propylene oxide. By using a UV‐A light intensity of 297.2 mW cm −2 , the propylene conversion and the epoxide yield were 31.5 and 22.2 %, respectively, significantly higher than that reported in the literature. Moreover, the energy consumption of the reaction system employed in this paper was significantly lower than that of photocatalytic systems studied in the literature dealing with selective propylene epoxidation.
Subjects
Author keywords
Authors and institutions
- Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II 132, 84084, Fisciano (SA), Italy.
- Department of Applied Science and Technology, INSTM Unit of Torino - Politecnico, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129, Torino, Italy.
- Physics Department, University of Torino, via P. Giuria 1, 10125, Torino, Italy.
- Centre for Sustainable Future Technology, Istituto Italiano di Tecnologia, Via Livorno 60, 10144, Torino, Italy.
ORCID profiles: Vincenzo Vaiano
Cite
APA
Morante, N., Tammaro, O., Monzillo, K., Sannino, D., Battiato, A., Vittone, E., Castellino, M., Esposito, S., & Vaiano, V. (2025). Unraveling the Role of CuO in Cu x O/TiO 2 Photocatalyst for the Direct Propylene Epoxidation With O 2 in a Fluidized Bed Reactor. ChemSusChem, 18(8). https://doi.org/10.1002/cssc.202401546
Vancouver
Morante N, Tammaro O, Monzillo K, Sannino D, Battiato A, Vittone E, et al. Unraveling the Role of CuO in Cu x O/TiO 2 Photocatalyst for the Direct Propylene Epoxidation With O 2 in a Fluidized Bed Reactor. ChemSusChem. 2025;18(8). doi:10.1002/cssc.202401546
BibTeX
@article{Morante2025,
author = {Morante, Nicola and Tammaro, Olimpia and Monzillo, Katia and Sannino, Diana and Battiato, Alfio and Vittone, Ettore and Castellino, Micaela and Esposito, Serena and Vaiano, Vincenzo},
title = {Unraveling the Role of CuO in Cu x O/TiO 2 Photocatalyst for the Direct Propylene Epoxidation With O 2 in a Fluidized Bed Reactor},
journal = {ChemSusChem},
year = {2025},
volume = {18},
number = {8},
doi = {10.1002/cssc.202401546}
}
EUVIMED