EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Intensifying Cyclopentanone Synthesis from Furfural Using Supported Copper Catalysts

Adarsh Patil iD, Maurik Engelbert van Bevervoorde, Fernanda Neira d'Angelo

ChemSusChem · 2025-02-16 · 18 (4)

DOI: 10.1002/cssc.202401484 ↗

At a glance

Journal article in ChemSusChem, published online on 2024-11-08. Written by Adarsh Patil and 2 co-authors. Institution: Sustainable Process Engineering Group, Eindhoven University of Technology, P.O. Box 513, 5600 MB, Eindhoven, The Netherlands. Cited 17 times so far (Crossref); 56 references. The full text is freely available (open access, CC BY 4.0). Funded by: Horizon 2020 Framework Programme.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This work addresses catalytic strategies to intensify the synthesis of cyclopentanone, a bio‐based platform chemical and a potential SAF precursor, via Cu‐catalyzed furfural hydrogenation in aqueous media. When performed in a single step, using either uniform or staged catalytic bed configuration, high temperature and hydrogen pressures (180 °C and 38 bar) are necessary for maximum CPO yields (37 and 49 %, respectively). Parallel furanic ring hydrogenation of furfural and polymerisation of intermediates, namely furfuryl alcohol (FFA), limit CPO yields. Employing a two step configuration with optimal catalyst bed can curb this limitation. First, the furanic ring hydrogenation can be suppressed by using milder conditions (i. e., 150 °C and 7 bar, and 14 seconds of residence time). Second, FFA hydrogenation using tandem catalysis, i. e., a mix of β‐zeolite and Cu/ZrO 2 , at 180 °C, 38 bar and 0.6, allows sufficient time for CPO formation and minimises polymerisation of FFA, thereby resulting in 60 % CPO yield. Therefore, this work recommends a split strategy to produce CPO from furfural. Such modularity may aid in addressing flexible market needs.

Subjects

Author keywords

Copper catalysisCyclopentanoneFurfuralHydrogenationPolymerization

Authors and institutions

  • Sustainable Process Engineering Group, Eindhoven University of Technology, P.O. Box 513, 5600 MB, Eindhoven, The Netherlands.

ORCID profiles: Adarsh Patil

Funding

  • Horizon 2020 Framework Programme

Cite

APA

Patil, A., Engelbert van Bevervoorde, M., & Neira d'Angelo, F. (2025). Intensifying Cyclopentanone Synthesis from Furfural Using Supported Copper Catalysts. ChemSusChem, 18(4). https://doi.org/10.1002/cssc.202401484

Vancouver

Patil A, Engelbert van Bevervoorde M, Neira d'Angelo F. Intensifying Cyclopentanone Synthesis from Furfural Using Supported Copper Catalysts. ChemSusChem. 2025;18(4). doi:10.1002/cssc.202401484

BibTeX
@article{Patil2025,
  author = {Patil, Adarsh and Engelbert van Bevervoorde, Maurik and Neira d'Angelo, Fernanda},
  title = {Intensifying Cyclopentanone Synthesis from Furfural Using Supported Copper Catalysts},
  journal = {ChemSusChem},
  year = {2025},
  volume = {18},
  number = {4},
  doi = {10.1002/cssc.202401484}
}
Start for free →