EUVIMEDSkopri EUVIMED
Crossref

Weldable, Reprocessable, and Water‐resistant Polybenzoxazine Vitrimer Crosslinked by Dynamic Imine Bonds

Sujuan Zhang, Jianjun Yi, Jiming Chen, Yong Li, Baoliang Liu, Zaijun Lu iD

ChemSusChem · 2024-07-22 · 17 (14)

DOI: 10.1002/cssc.202301708 ↗

At a glance

Journal article in ChemSusChem, published online on 2024-03-28. Written by Sujuan Zhang and 5 co-authors. Institution: Key Laboratory for Special Functional Aggregated Materials of Ministry of Education, School of Chemistry and Chemical Engineering, Shandong Universit…. Cited 41 times so far (Crossref); 52 references. Funded by: National Natural Science Foundation of China, Research Project.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Traditional polybenzoxazine thermosets cannot be reprocessed or recycled due to the permanent crosslinked networks. The dynamic exchangeable characteristics of imine bonds can impart the networks with reprocessabilities and recyclabilities. This study reported a weldable, reprocessable, and water‐resistant polybenzoxazine vitrimer (C‐ABZ) crosslinked by dynamic imine bonds. It was synthesized through a condensation reaction between an aldehyde‐containing benzoxazine oligomer (O‐ABZ) and 1,12‐dodecanediamine. The resulting C‐ABZ was able to be welded and reprocessed due to the dynamic exchange of imine bonds. The tensile strengths of the welded C‐ABZ and the reprocessed C‐ABZ after three cycles of hot‐pressing were 76.7, 81.3, 70.8, and 58.1 Mpa, with corresponding tensile strength recovery ratios of 74.1 %, 78.6 %, 68.4 %, and 56.1 %, respectively. Furthermore, the polybenzoxazine backbone significantly improved the water resistance of the imine bonds. After immersing in water for 30 days at room temperature, the weight gain of C‐ABZ was less than 1 % with corresponding tensile strength and tensile strength retention ratio of 59.5 Mpa and 57.5 %, respectively. Although the heat resistance of C‐ABZ decreased slightly with increased hot‐pressing cycles, a glass transition temperature ( T g, tanδ ) of 150 °C was retained after the third hot‐pressing. Overall, these findings demonstrate that the C‐ABZ possesses excellent comprehensive performances.

Subjects

Author keywords

Polybenzoxazine vitrimerimine bondreprocessabilitywater resistanceweldability

Authors and institutions

  • Key Laboratory for Special Functional Aggregated Materials of Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan, 250100, P. R. China.
  • Institute of Lanzhou Petrochemical Company PetroChina, Lanzhou, 730060, P. R. China.

ORCID profiles: Zaijun Lu

Funding

  • National Natural Science Foundation of China
  • Research Project

Cite

APA

Zhang, S., Yi, J., Chen, J., Li, Y., Liu, B., & Lu, Z. (2024). Weldable, Reprocessable, and Water‐resistant Polybenzoxazine Vitrimer Crosslinked by Dynamic Imine Bonds. ChemSusChem, 17(14). https://doi.org/10.1002/cssc.202301708

Vancouver

Zhang S, Yi J, Chen J, Li Y, Liu B, Lu Z. Weldable, Reprocessable, and Water‐resistant Polybenzoxazine Vitrimer Crosslinked by Dynamic Imine Bonds. ChemSusChem. 2024;17(14). doi:10.1002/cssc.202301708

BibTeX
@article{Zhang2024,
  author = {Zhang, Sujuan and Yi, Jianjun and Chen, Jiming and Li, Yong and Liu, Baoliang and Lu, Zaijun},
  title = {Weldable, Reprocessable, and Water‐resistant Polybenzoxazine Vitrimer Crosslinked by Dynamic Imine Bonds},
  journal = {ChemSusChem},
  year = {2024},
  volume = {17},
  number = {14},
  doi = {10.1002/cssc.202301708}
}
Start for free →