EUVIMEDOpdag EUVIMED
Crossref

Binary Mg‐1 at%Gd alloy anode for high‐performance rechargeable magnesium batteries

Han Liu, Shuangshuang Tan iD, Zhongting Wang, Yifan Chen, Jili Yue, Dong Wang, Guangsheng Huang, Jingfeng Wang, Fusheng Pan

ChemSusChem · 2024-02-22 · 17 (4)

DOI: 10.1002/cssc.202301589 ↗

At a glance

Journal article in ChemSusChem, published online on 2024-01-15. Written by Han Liu and 8 co-authors. Institution: College of Materials Science and Engineering, Chongqing University, Chongqing, 400044, P. R. China. Cited 7 times so far (Crossref); 47 references. Funded by: National Key Research and Development Program of China, National Natural Science Foundation of China, Chongqing Technology Innovation and Application Development Project.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Rechargeable magnesium batteries (RMBs) become a highly promising candidate for the large‐scale energy storage system by right of the high volumetric capacity, intrinsic safety and abundant resources of Mg anode. However, the uneven Mg stripping and large overpotential will cause a severe pitting perforation and the followed failure of Mg anode. Herein, we proposed a high‐performance binary Mg‐1 at% Gd alloy anode prepared by the melting and hot extrusion. The introduction of 1 at% Gd element can effectively reduce the Mg 2+ diffusion energy barrier (0.34 eV) on alloy surface and induces the formation of a robust and low‐resistance electrolyte/anode interphase, thus enabling a uniform and fast Mg plating/stripping. As a result, the Mg‐1 at.% Gd anode displays a largely enhanced life of 220 h and a low overpotential of 213 mV at a high current density of 5.0 mA cm −2 with 2.5 mAh cm −2 . Moreover, the assembled Mg‐1 at.% Gd//Mo 6 S 8 full cell delivers a high rate performance (73.5 mAh g −1 at 5 C) and ultralong cycling stability of 8000 cycles at 5 C. This work brings new insights to design the new‐type and practical Mg alloy anodes for commercial RMBs.

Subjects

Author keywords

Binary Mg alloysMg anodeselectrochemistrylong cycling liferechargeable Mg batteries

Authors and institutions

  • College of Materials Science and Engineering, Chongqing University, Chongqing, 400044, P. R. China.
  • National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing, 400044, P. R. China.

ORCID profiles: Shuangshuang Tan

Funding

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Chongqing Technology Innovation and Application Development Project

Cite

APA

Liu, H., Tan, S., Wang, Z., Chen, Y., Yue, J., Wang, D., Huang, G., Wang, J., & Pan, F. (2024). Binary Mg‐1 at%Gd alloy anode for high‐performance rechargeable magnesium batteries. ChemSusChem, 17(4). https://doi.org/10.1002/cssc.202301589

Vancouver

Liu H, Tan S, Wang Z, Chen Y, Yue J, Wang D, et al. Binary Mg‐1 at%Gd alloy anode for high‐performance rechargeable magnesium batteries. ChemSusChem. 2024;17(4). doi:10.1002/cssc.202301589

BibTeX
@article{Liu2024,
  author = {Liu, Han and Tan, Shuangshuang and Wang, Zhongting and Chen, Yifan and Yue, Jili and Wang, Dong and Huang, Guangsheng and Wang, Jingfeng and Pan, Fusheng},
  title = {Binary Mg‐1 at%Gd alloy anode for high‐performance rechargeable magnesium batteries},
  journal = {ChemSusChem},
  year = {2024},
  volume = {17},
  number = {4},
  doi = {10.1002/cssc.202301589}
}
Start for free →