EUVIMEDOpdag EUVIMED
Open access · CC BY-NC-ND 4.0

Revealing the Structural Evolution of Electrode/Electrolyte Interphase Formation during Magnesium Plating and Stripping with operando EQCM‐D

Benjamin W Schick iD, Xu Hou iD, Viktor Vanoppen, Matthias Uhl iD, Matthias Kruck iD, Erik J Berg iD, Timo Jacob iD

ChemSusChem · 2024-02-22 · 17 (4)

DOI: 10.1002/cssc.202301269 ↗

At a glance

Journal article in ChemSusChem, published online on 2023-11-22. Written by Benjamin W Schick and 6 co-authors. Institution: Institute of Electrochemistry, Ulm University, Albert-Einstein-Allee 47, 89081, Ulm, Germany. Cited 9 times so far (Crossref); 54 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: German Research Foundation, priority program SPP 2248 Polymer-based Batteries, Deutsche Forschungsgemeinschaft.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Rechargeable magnesium batteries could provide future energy storage systems with high energy density. One remaining challenge is the development of electrolytes compatible with the negative Mg electrode, enabling uniform plating and stripping with high Coulombic efficiencies. Often improvements are hindered by a lack of fundamental understanding of processes occurring during cycling, as well as the existence and structure of a formed interphase layer at the electrode/electrolyte interface. Here, a magnesium model electrolyte based on magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 ) and MgCl 2 with a borohydride as additive, dissolved in dimethoxyethane (DME), was used to investigate the initial galvanostatic plating and stripping cycles operando using electrochemical quartz crystal microbalance with dissipation monitoring (EQCM‐D). We show that side reactions lead to the formation of an interphase of irreversibly deposited Mg during the initial cycles. EQCM‐D based hydrodynamic spectroscopy reveals the growth of a porous layer during Mg stripping. After the first cycles, the interphase layer is in a dynamic equilibrium between the formation of the layer and its dissolution, resulting in a stable thickness upon further cycling. This study provides operando information of the interphase formation, its changes during cycling and the dynamic behavior, helping to rationally develop future electrolytes and electrode/electrolyte interfaces and interphases.

Subjects

Author keywords

EQCM-Delectrochemistryelectrolytehydrodynamic spectroscopyinterphasemagnesium batterystructure

Authors and institutions

  • Institute of Electrochemistry, Ulm University, Albert-Einstein-Allee 47, 89081, Ulm, Germany.
  • Department of Chemistry - Ångström Laboratory, Structural Chemistry, Uppsala University, Lägerhyddsvägen 1, 752 37, Uppsala, Sweden.
  • Helmholtz-Institute Ulm (HIU) for Electrochemical Energy Storage, Helmholtzstr. 11, 89081, Ulm, Germany.
  • Karlsruhe Institute of Technology (KIT), P.O. Box 3640, 76021, Karlsruhe, Germany.

ORCID profiles: Benjamin W Schick, Xu Hou, Matthias Uhl, Matthias Kruck, Erik J Berg, Timo Jacob

Funding

  • German Research Foundation
  • priority program SPP 2248 Polymer-based Batteries
  • Deutsche Forschungsgemeinschaft

Cite

APA

Schick, B. W., Hou, X., Vanoppen, V., Uhl, M., Kruck, M., Berg, E. J., & Jacob, T. (2024). Revealing the Structural Evolution of Electrode/Electrolyte Interphase Formation during Magnesium Plating and Stripping with operando EQCM‐D. ChemSusChem, 17(4). https://doi.org/10.1002/cssc.202301269

Vancouver

Schick BW, Hou X, Vanoppen V, Uhl M, Kruck M, Berg EJ, et al. Revealing the Structural Evolution of Electrode/Electrolyte Interphase Formation during Magnesium Plating and Stripping with operando EQCM‐D. ChemSusChem. 2024;17(4). doi:10.1002/cssc.202301269

BibTeX
@article{Schick2024,
  author = {Schick, Benjamin W and Hou, Xu and Vanoppen, Viktor and Uhl, Matthias and Kruck, Matthias and Berg, Erik J and Jacob, Timo},
  title = {Revealing the Structural Evolution of Electrode/Electrolyte Interphase Formation during Magnesium Plating and Stripping with operando EQCM‐D},
  journal = {ChemSusChem},
  year = {2024},
  volume = {17},
  number = {4},
  doi = {10.1002/cssc.202301269}
}
Start for free →