EUVIMEDOpdag EUVIMED
Crossref

Thermal Decomposition Assisted Construction of Nano‐Li 3 N Sites Interface Layer Enabling Homogeneous Li Deposition

Hongyang Li, Ling Li, Jingang Zheng, Hao Huang, Han Zhang, Baigang An, Xin Geng, Chengguo Sun

ChemSusChem · 2023

DOI: 10.1002/cssc.202202220 ↗

At a glance

Journal article in ChemSusChem, 2023. Written by Hongyang Li and 7 co-authors. Institution: School of Chemical Engineering, University of Science and Technology Liaoning, Anshan, 114051, P. R. China. Major MEDLINE topics: Lithium, Electric Power Supplies. Cited 11 times so far (Crossref); 61 references. Funded by: National Natural Science Foundation of China, University of Science and Technology Liaoning, Key Laboratory of Energy Materials and Electrochemistry Liaoning Province.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Lithium (Li) metal is a highly desirable anode for all‐solid‐state lithium‐ion batteries (ASSLBs) due to its high theoretical capacity and being well matched with solid‐state electrolytes. However, the practical applications of Li metal anode are hindered by the uneven Li metal plating/stripping behavior and poor contact between electrolyte and Li anode. Herein, a convenient and efficient strategy to construct the Li 3 N‐based interlayer between solid poly(ethylene oxide) (PEO) electrolyte and Li anode is proposed by in situ thermal decomposition of 2,2′‐azobisisobutyronitrile (AIBN) additive. The evolved Li 3 N nanoparticles are capable of combining LiF, cyano derivatives and PEO electrolyte to form a buffer layer of about 0.9 μm during the cell cycle, which can buffer Li + concentration and homogenize Li deposition. The Li||Li symmetric cells with Li 3 N‐based interlayer show excellent cycle stability at 0.2 mA cm −2 , which is at least 4 times longer cycle life than that of PEO electrolytes without Li 3 N layer. This work provides a convenient strategy for designing interface engineering between solid‐state polymer electrolyte and Li anode.

Subjects

MeSH terms (MEDLINE)

LithiumElectric Power SuppliesElectrodesElectroplatingEngineering

Author keywords

Li3N interface layerlithium metal anodelithium-ion batterysolid polymer electrolytesolid-state battery

Substances

Lithium

Authors and institutions

  • School of Chemical Engineering, University of Science and Technology Liaoning, Anshan, 114051, P. R. China.
  • School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing, 210094, P. R. China.

Funding

  • National Natural Science Foundation of China
  • University of Science and Technology Liaoning
  • Key Laboratory of Energy Materials and Electrochemistry Liaoning Province

Cite

APA

Li, H., Li, L., Zheng, J., Huang, H., Zhang, H., An, B., Geng, X., & Sun, C. (2023). Thermal Decomposition Assisted Construction of Nano‐Li 3 N Sites Interface Layer Enabling Homogeneous Li Deposition. ChemSusChem. https://doi.org/10.1002/cssc.202202220

Vancouver

Li H, Li L, Zheng J, Huang H, Zhang H, An B, et al. Thermal Decomposition Assisted Construction of Nano‐Li 3 N Sites Interface Layer Enabling Homogeneous Li Deposition. ChemSusChem. 2023. doi:10.1002/cssc.202202220

BibTeX
@article{Li2023,
  author = {Li, Hongyang and Li, Ling and Zheng, Jingang and Huang, Hao and Zhang, Han and An, Baigang and Geng, Xin and Sun, Chengguo},
  title = {Thermal Decomposition Assisted Construction of Nano‐Li 3 N Sites Interface Layer Enabling Homogeneous Li Deposition},
  journal = {ChemSusChem},
  year = {2023},
  doi = {10.1002/cssc.202202220}
}
Start for free →