EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Microtensile Bond Strength of a 3D‐Printed Hybrid Material Under Various Adhesive Strategies

Patricia Freire-Nieto iD, Lissethe Peñate-González iD, Luis Jané-Chimeno iD, Anaïs Ramírez-Sebastià iD, Miguel Roig-Cayón iD, Marta Vallés-Rodríguez iD

Clinical and Experimental Dental Research · 2026-04 · 12 (2)

DOI: 10.1002/cre2.70363 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical and Experimental Dental Research, online erschienen am 28.04.2026. Verfasst von Patricia Freire-Nieto und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Restorative Dentistry, Faculty of Dentistry, Universitat Internacional de Catalunya, Barcelona, Spain. Hauptthemen laut MEDLINE: Dental Bonding, Resin Cements, Printing, Three-Dimensional, Crowns. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

Printed dental materials have emerged to overcome the limitations associated with the subtractive CAD/CAM technologies. The aim of the present study was to evaluate the optimal adhesive strategy for Permanent Crown Resin, a printed hybrid material. Material and Methods Eighteen specimens of Permanent Crown Resin were divided into three groups of six blocks each, measuring 30 × 30 × 10 mm. A specific surface pretreatment was performed, involving two groups undergoing hydrofluoric acid etching (60 s) and sandblasting (20 s), whereas the third group remained devoid of any pretreatment. Comprehensive surface characterization was achieved using a scanning electron microscope (SEM) at magnifications of 500× and 1000×. Each of the main groups was further divided into three subgroups, each containing two blocks. The paired blocks within each subgroup were then cemented to each other using different cementation protocols: a dual‐cure self‐adhesive resin cement RelyX TM Unicem 2, a dual‐cure adhesive ExciTE® F DSC, followed by dual‐cure resin cement Variolink® Esthetic DC, and a light‐cure universal adhesive Scotchbond TM Universal in combination with preheated composite Filtek TM Supreme XTE. Subsequently, the specimens were sectioned, and 20 sound micro‐bars were obtained from each specimen ( n = 180). Each micro‐bar was subjected to microtensile bond strength (μTBS) testing at a crosshead speed of 0.5 mm/min.

Results

SEM analysis revealed a smooth surface in the control group, whereas the HF group showed numerous micropores. The sandblasting group showed the roughest surface. Statistical analysis was performed using two‐way ANOVA, and a p ‐value of ≤ 0.05 was considered statistically significant. Regarding the μTBS test, sandblasting pretreatment combined with RelyX TM Unicem 2 demonstrated higher bond strength than the other groups (60.23 MPa). The predominant mode of failure across all groups was adhesive.

Conclusions

Within the limitations of this study, sandblasting in conjunction with RelyX TM Unicem 2 provided the highest bond strength for Permanent Crown Resin.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental BondingResin CementsPrinting, Three-DimensionalCrownsDental MaterialsTensile StrengthMaterials TestingMicroscopy, Electron, ScanningSurface PropertiesHumansComposite ResinsDental Stress AnalysisComputer-Aided DesignAcid Etching, Dental

Stichwörter der Autor:innen

adhesiondefinitive crownmicrotensile bond strengthprinted hybrid material

Substanzen

Resin CementsComposite ResinsDental MaterialsVariolink

Autor:innen und Institutionen

  • Department of Restorative Dentistry, Faculty of Dentistry, Universitat Internacional de Catalunya, Barcelona, Spain.
  • Department of Endodontics, Faculty of Dentistry, Universitat Internacional de Catalunya, Barcelona, Spain.

ORCID-Profile: Patricia Freire-Nieto, Lissethe Peñate-González, Luis Jané-Chimeno, Anaïs Ramírez-Sebastià, Miguel Roig-Cayón, Marta Vallés-Rodríguez

Zitieren

APA

Freire-Nieto, P., Peñate-González, L., Jané-Chimeno, L., Ramírez-Sebastià, A., Roig-Cayón, M., & Vallés-Rodríguez, M. (2026). Evaluation of Microtensile Bond Strength of a 3D‐Printed Hybrid Material Under Various Adhesive Strategies. Clinical and Experimental Dental Research, 12(2). https://doi.org/10.1002/cre2.70363

Vancouver

Freire-Nieto P, Peñate-González L, Jané-Chimeno L, Ramírez-Sebastià A, Roig-Cayón M, Vallés-Rodríguez M. Evaluation of Microtensile Bond Strength of a 3D‐Printed Hybrid Material Under Various Adhesive Strategies. Clinical and Experimental Dental Research. 2026;12(2). doi:10.1002/cre2.70363

BibTeX
@article{FreireNieto2026,
  author = {Freire-Nieto, Patricia and Peñate-González, Lissethe and Jané-Chimeno, Luis and Ramírez-Sebastià, Anaïs and Roig-Cayón, Miguel and Vallés-Rodríguez, Marta},
  title = {Evaluation of Microtensile Bond Strength of a 3D‐Printed Hybrid Material Under Various Adhesive Strategies},
  journal = {Clinical and Experimental Dental Research},
  year = {2026},
  volume = {12},
  number = {2},
  doi = {10.1002/cre2.70363}
}
Kostenlos starten →