EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Vitro Evaluation of Flexural Strength, Impact Strength, and Surface Microhardness of Vaccinium macrocarpon Reinforced Polymethyl Methacrylate Denture Base Resin

Anitha Kuttae Viswanathan iD, Rajkumar Krishnan

Clinical and Experimental Dental Research · 2025

DOI: 10.1002/cre2.70145 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical and Experimental Dental Research, 2025. Verfasst von Anitha Kuttae Viswanathan und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, SRM Dental College, Chennai, Tamil Nadu, India. Hauptthemen laut MEDLINE: Polymethyl Methacrylate, Vaccinium macrocarpon, Flexural Strength, Denture Bases. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The authors received no specific funding for this work..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

The antimicrobial efficacy of cranberry (CA) against oral infections was well evidenced. Influence of cranberry on the mechanical properties of heat‐activated polymethyl methacrylate (HA‐PMMA) denture base resin (DBR) is unexplored till date and is significant for a better understanding of the reinforcement. This study aimed to evaluate the flexural strength (FS), impact strength (IS), and surface microhardness (VHN) of heat‐cure PMMA DBR reinforced with varying concentrations of Vaccinium macrocarpon (cranberry) extract. Material and Methods A total of 150 samples were categorized into five groups ( n = 10) by weight percentage of 0, 0.5, 1.0, 1.5, and 2.0 cranberry extract added into HA‐PMMA polymer after the performance of antimicrobial efficacy testing of CA. Three‐point bending test for FT, Izod impact testing for IS, and Vickers microhardness test were performed. Fractured sample surface was characterized by a high‐resolution scanning electron microscope (HR‐SEM). Raw data were statistically analyzed with one‐way ANOVA and post hoc Bonferroni test.

Results

A significant improvement in flexural strength of 76.88 ± 0.73 MPa, impact strength of 6.66 ± 0.24 kJ/m 2 , and microhardness of 18.44 ± 0.27 kg/mm 2 was observed at 2 wt.% ( p < 0.0001). Fractured surface topography showed dispersion of cranberry particles as a thin fibrous band intermeshed within resin matrix.

Conclusions

Addition of up to 2 wt.% cranberry improved the FS, IS, and VHN on comparison to 0 wt.% control HA‐PMMA.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Polymethyl MethacrylateVaccinium macrocarponFlexural StrengthDenture BasesPlant ExtractsHardnessMaterials TestingSurface PropertiesIn Vitro TechniquesMicroscopy, Electron, Scanning

Stichwörter der Autor:innen

cranberrydenture base resinpolymethyl methacrylate

Substanzen

Polymethyl MethacrylatePlant Extracts

Autor:innen und Institutionen

  • Department of Prosthodontics, SRM Dental College, Chennai, Tamil Nadu, India.
  • Department of Oral Pathology, SRM Dental College, Chennai, Tamil Nadu, India.

ORCID-Profile: Anitha Kuttae Viswanathan

Förderung

  • The authors received no specific funding for this work.

Zitieren

APA

Viswanathan, A. K., & Krishnan, R. (2025). In Vitro Evaluation of Flexural Strength, Impact Strength, and Surface Microhardness of Vaccinium macrocarpon Reinforced Polymethyl Methacrylate Denture Base Resin. Clinical and Experimental Dental Research. https://doi.org/10.1002/cre2.70145

Vancouver

Viswanathan AK, Krishnan R. In Vitro Evaluation of Flexural Strength, Impact Strength, and Surface Microhardness of Vaccinium macrocarpon Reinforced Polymethyl Methacrylate Denture Base Resin. Clinical and Experimental Dental Research. 2025. doi:10.1002/cre2.70145

BibTeX
@article{Viswanathan2025,
  author = {Viswanathan, Anitha Kuttae and Krishnan, Rajkumar},
  title = {In Vitro Evaluation of Flexural Strength, Impact Strength, and Surface Microhardness of Vaccinium macrocarpon Reinforced Polymethyl Methacrylate Denture Base Resin},
  journal = {Clinical and Experimental Dental Research},
  year = {2025},
  doi = {10.1002/cre2.70145}
}
Kostenlos starten →