Interfacial Stabilization of Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 Solid Electrolytes Enabled by a Sulfone‐Based Crystalline Organic Interlayer
ChemPhysChem · 2026-08-14 · 27 (15)
DOI: 10.1002/cphc.70531 ↗At a glance
Journal article in ChemPhysChem, published online on 2026-08-06. Written by Songyi Han and 4 co-authors. Institution: Advanced Energy Technology and Integrated Innovation Laboratory, College of Mechanical and Electrical Engineering, Shandong Vocational College of Ind…. 33 references. The full text is freely available in PubMed Central. Funded by: National Natural Science Foundation of China, Shandong Vocational College of Industry Research Startup Fund Project, General Project of Shandong Provincial Education and Teaching Research.
Abstract (original language)
NASICON‐structured Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP) solid electrolyte (SE) exhibits satisfactory ionic conductivity and robust mechanical strength, but it suffers from interfacial instability against lithium metal anodes due to Ti 4+ reduction, which limits its application in solid‐state lithium metal batteries (SSLMBs). Herein, we developed a sulfone‐based crystalline organic interlayer (COI) composed of dimethyl sulfone and lithium bis(trifluoromethanesulfonyl)imide at an optimized molar ratio of 8:2, and applied it to LATP pellet surfaces via a melt‐casting process. The standalone COI exhibits a room‐temperature ionic conductivity of 0.67 mS cm −1 . The resulting LATP@COI composite shows an ionic conductivity of 0.78 mS cm −1 and a critical current density of 1.5 mA cm −2 . Li|LATP@COI|Li symmetric cells deliver stable cycling for over 700 h at 0.1 mA cm −2 . Full cells using LiFePO 4 and LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode with the lithium metal anode retain 93.1% and 92.3% of their initial capacities after 200 cycles, respectively, while maintaining excellent rate capability up to 2 C and operable discharge down to −40 °C. This COI provides a practical interfacial‐engineering strategy to overcome the intrinsic limitations of LATP SEs for SSLMBs.
Subjects
Author keywords
Authors and institutions
- Advanced Energy Technology and Integrated Innovation Laboratory, College of Mechanical and Electrical Engineering, Shandong Vocational College of Industry, Zibo, China.
- Shanghai Institute of Space Power-Sources (SISP), Shanghai Academy of Spaceflight Technology, Shanghai, China.
- School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai, China.
ORCID profiles: Junchao Chen
Funding
- National Natural Science Foundation of China
- Shandong Vocational College of Industry Research Startup Fund Project
- General Project of Shandong Provincial Education and Teaching Research
- Pujiang Project of the Shanghai Baiyulan Talent Program
- Natural Science Foundation of Shanghai Municipality
- Open Foundation of Shanghai Jiao Tong University Shaoxing Research Institute of Renewable Energy and Molecular Engineering
- Opening Project of State Key Laboratory of Space-Power Sources
Cite
APA
Han, S., Zhu, L., Yu, M., Tang, W., & Chen, J. (2026). Interfacial Stabilization of Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 Solid Electrolytes Enabled by a Sulfone‐Based Crystalline Organic Interlayer. ChemPhysChem, 27(15). https://doi.org/10.1002/cphc.70531
Vancouver
Han S, Zhu L, Yu M, Tang W, Chen J. Interfacial Stabilization of Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 Solid Electrolytes Enabled by a Sulfone‐Based Crystalline Organic Interlayer. ChemPhysChem. 2026;27(15). doi:10.1002/cphc.70531
BibTeX
@article{Han2026,
author = {Han, Songyi and Zhu, Lei and Yu, Muran and Tang, Weiping and Chen, Junchao},
title = {Interfacial Stabilization of Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 Solid Electrolytes Enabled by a Sulfone‐Based Crystalline Organic Interlayer},
journal = {ChemPhysChem},
year = {2026},
volume = {27},
number = {15},
doi = {10.1002/cphc.70531}
}
EUVIMED