EUVIMEDEUVIMED entdecken
Crossref

Performance Optimization of Inorganic CsPbI 3 Perovskite Solar Cells Using ZnO and SnO 2 Electron Transport Layers on Indium Tin Oxide and Fluorine‐Doped Tin Oxide Substrates

B. Reyoun Frances, D. Balamurugan, B. G. Jeyaprakash

ChemNanoMat · 2026-07 · 12 (7)

DOI: 10.1002/cnma.70339 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemNanoMat, online erschienen am 24.07.2026. Verfasst von B. Reyoun Frances und 2 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thisstudy investigates the enhancement of performance and operational stability in inorganic CsPbI 3 perovskite solar cells through optimization of transparent conducting substrates and electron transport layers (ETLs). Performance degradation caused by interfacial recombination, inefficient charge extraction, and long‐term instability motivated a comparative analysis of ITO and FTO substrates combined with ZnO and SnO 2 ETLs. Four device architectures ITO/ZnO/CsPbI 3 /Ag, ITO/SnO 2 /CsPbI 3 /Ag, FTO/ZnO/CsPbI 3 /Ag, and FTO/SnO 2 /CsPbI 3 /Ag were fabricated and systematically evaluated. Structural characterization revealed improved crystallinity and phase stability of CsPbI 3 films grown on ITO substrates. Morphology showed dense, uniform morphologies with reduced grain boundaries, favoring efficient charge transport. X‐ray photoelectron spectroscopy confirmed the stable chemical states and proper elemental incorporation, indicating good interfacial integrity. Optical studies demonstrated strong visible‐light absorption, while pronounced photoluminescence quenching in the ITO/ZnO‐based device indicated enhanced charge extraction and suppressed recombination. Under AM 1.5G illumination, the ITO/ZnO/CsPbI 3 /Ag device exhibited superior photovoltaic performance with a PCE of 14.7%, a J SC of 21 mA cm −2 , an V OC of 1.0 V, and an FF of 70%. External quantum efficiency and stability tests over 300 h further confirmed improved photocurrent generation and durability for ITO‐based devices, highlighting ITO/ZnO as an optimal ETL–substrate combination.

Zitieren

APA

Frances, B. R., Balamurugan, D., & Jeyaprakash, B. G. (2026). Performance Optimization of Inorganic CsPbI 3 Perovskite Solar Cells Using ZnO and SnO 2 Electron Transport Layers on Indium Tin Oxide and Fluorine‐Doped Tin Oxide Substrates. ChemNanoMat, 12(7). https://doi.org/10.1002/cnma.70339

Vancouver

Frances BR, Balamurugan D, Jeyaprakash BG. Performance Optimization of Inorganic CsPbI 3 Perovskite Solar Cells Using ZnO and SnO 2 Electron Transport Layers on Indium Tin Oxide and Fluorine‐Doped Tin Oxide Substrates. ChemNanoMat. 2026;12(7). doi:10.1002/cnma.70339

BibTeX
@article{Frances2026,
  author = {Frances, B. Reyoun and Balamurugan, D. and Jeyaprakash, B. G.},
  title = {Performance Optimization of Inorganic CsPbI 3 Perovskite Solar Cells Using ZnO and SnO 2 Electron Transport Layers on Indium Tin Oxide and Fluorine‐Doped Tin Oxide Substrates},
  journal = {ChemNanoMat},
  year = {2026},
  volume = {12},
  number = {7},
  doi = {10.1002/cnma.70339}
}
Kostenlos starten →